Laserfiche WebLink
June 3, 2008 <br />"at 0 <br />San Joaquin County <br />• <br />Walton Engineering <br />P O Box 1025 <br />West Sacramento, CA 95691 <br />Attn: Michael Walton <br />.., f ,f - f <br />Phone: 1" 468-3420 <br />1'464-0138 <br />Re: 1196 W Louise Avenue, Manteca, CA 95336 <br />DIRECTOR <br />Donna Heran, REHS <br />ASSISTANT DIRECTOR <br />Laurie Cotulla, REHS <br />PROGRAM COORDINATORS <br />Carl Borgman, REHS <br />Mike Huggins, REHS, RDI <br />Margaret Lagorio, REHS <br />Robert McClellon, REHS <br />Jeff Carruesco, REHS, RDI <br />Kasey Foley, REHS <br />The San Joaquin County Environmental Health Department (EHD) has completed the <br />review of the application for permit to perform cold start after replacing a defective <br />ECPU board at the above noted address. The permit has been approved with the <br />following conditions: <br />1. Contact the local fire department and the San Joaquin Valley Air Pollution <br />Control District for any applicable permits and requirements. <br />2. Contact Muniappa Naidu at (209) 468-3439 to arrange the following inspection <br />appointment (a 48-hour notice is required for inspection appointments): <br />a. Functionality test to ensure that monitoring has been restored to meet the <br />requirements of California Code of Regulations Title 23 and the Health & <br />Safety Code. <br />3. Any changes in information and scope of work must be submitted to EHD for <br />approval prior to commencing work. All new addenda supersede the previous <br />ones. <br />4. Qualified service technicians must possess or work under the direct and personal <br />supervision of an individual physically present at the work site who possesses all <br />of the following: <br />a. One of several permissible valid, current contractor's licenses issued by <br />the Contractors State License Board (may be issued to the installation <br />company), and <br />b. A valid, current California UST Service Technician certificate issued by <br />the International Code Council (ICC), and <br />c. A valid, current certificate of training from the manufacturer(s) of the <br />component(s) being tested, repaired, or serviced. <br />and <br />d. Each person installing or testing any component must hold a certificate of <br />training from the manufacturer of that component. <br />