Laserfiche WebLink
• •SWRCB,January 2002 Page ofa <br /> 8. FILL RISER CONTA NT SUW TESTING <br /> -Facility is Not Equipped With Fill Riser Containment Sumps <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑Sump Manufacturer ❑Wustry Standard ❑Professional Engineer <br /> ❑Other(Spec) �- <br /> Test Method Used: ❑Pressure ❑Vacuum ❑Hydrostatic <br /> ❑Other(Sped) <br /> Test Equipment Used: ' Equipment Resolution: <br /> n <br /> Fill Sump# Fill Sump# Fill Sum #` FillµSump## <br /> -Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest P!ping Penetration: ,r <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying , <br /> pressure/vacuum/water and �'• <br /> startin test: <br /> Test Start Time: <br /> Initial Reading(Ro., <br /> Test End Time:: <br /> Final Reading(RF <br /> Test tion: <br /> Chane in Readin RF- r): <br /> Pass/Fail Thttshold or Cri ''a: _ <br /> Test Results ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail <br /> Is there a sensor in th sump? ❑Yes ❑No ❑Yes ❑No ❑Yes ❑No Yes ❑No <br /> Does the sensor al when <br /> either product or ater is ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes o ❑NA <br /> detected? <br /> Was sensor moved for testing? ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [J NA <br /> Was sensoi properly replaced and ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA <br /> verified; 6a tional after testin ? <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />