COMPLIANCE INFO_2005-2012 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used:Caldwell Level Change Indicator Equipment Resolution: .002 Sump#1 Sump#2 Sump#3 Sump# Sump Diameter: 42" 42" 42" Sump Depth: 59" 59" 59" Sump Material: Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of 13"Vapor 11"Vent 8"Vent Highest Piping Penetration: 11"Product 14"Product 15"Product Height from Tank Top to Lowest 17" 21" 22" Electrical Penetration: Condition of sump prior to testing: Dry Dry Dry Portion of Sump Tested' Water Line 19" Water Line 23" Water Line 24" Does turbine shut down when sump sensor detects liquid(both X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA product and water)?* Turbine shutdown response time Not Alarmed Not Alarmed Not Alarmed Is system programmed for fail-safe X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA shutdown? Was fail-safe verified to be Yes X No ❑NA Yes X No ❑NA Yes X No ❑NA o erational?` Wait time between applying water 5 Minutes 5 Minutes 5 Minutes and starting test: Test Start Time: 10:20 11:10 10:30 Initial Reading(Rj): .001 .001 .001 Test End Time: 10:50 11:40 11:00 Final Reading(RF): .001 .001 .001 Test Duration: 30 Minutes 30 Minutes 30 Minutes Change in Reading(RF-Ri): 0 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes .005/30 Minutes Test Result: X Pass' Q Fail X Pass ❑Fail X Pass 0 Fail Q.Pass` ❑Fail Was sensor removed for testing? X Yes ❑No [INA X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and verified functional after testi n ? X Yes ❑No LlNA X Yes ❑No ❑NA X Yes ElNo ElNA El Yes ❑No ❑NA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to as of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)