Laserfiche WebLink
LjName of ATG -5 <br />Version TLP2 (0-9 ooh Normal Test Mode <br />Limitations on the Results <br />The performance estimates above are only valid when: <br />0 The method has not been substantially changed. <br />0 The vendor's instructions for installing and operating the ATGS are followed. <br />0 The tank contains a product identified on the method description form. <br />0 The tank is no larger than _15.000 gallons. <br />0 The tank is at least _50 percent full. <br />0 The waiting time after adding any substantial amount of product to the tank is <br />hr <br />0 min hours. <br />0 The temperature Of the added product does not differ more than 6.5 degrees <br />Fahrenheit from that already in the tank. <br />0 The total data collection time for the test is at least 4 hours. <br />0 Other limitations specified by the vendor or determined during testing: <br />> Safety disclaimer: This test procedure only addresses the issue of the ATG system's <br />ability to detect leaks. It does not test the equipment for safety hazards. <br />Ceft• nf 94--ruAte <br />I certify that the ATGS was installed and operated according to the vendor's instructio <br />also certify that the evaluation was performed according to one of the followi I <br />and that the results presented on this form are those obtained during the eva uation. <br />standard EPA test procedure for ATGS ng: <br />alternative EPA test procedure for ATGS <br />(printed name) Flora Midwest Research Institute <br />(organization performing evaluation) <br />425 Volker Blvd., k-.,,SaS City, MO 64110 <br />(city, state, zip) <br />Mav 97 lqq,) <br />(date) <br />ATGS - Results Form <br />0 <br />1nA101A1;Rmj!fflj8Ta <br />