Laserfiche WebLink
Lit <br />Name of ATGS <br />Version <br />The performance estimates above are only valid when: <br />0 The method has not been substantially changed. <br />0 The vendor's instructions for installing and operating the ATGS are followed. <br />• The tank contains a product identified on the method description form. <br />• The tank is no larger than 15,000 -gallons. <br />• The tank is at least 5_0 percent full. <br />0 The waiting time after adding any substantial amount of •product to the tank is - 6 hr, <br />40 min— hours. <br />0 The temperature of the added product does not differ more than 6.5 degrees <br />Fahrenheit from that already in the tank. <br />0 The total data collection time for the test is at least - 4 hours. <br />41 Other limitations specified by the vendor or determined during testing <br />> Safety disclaimer: This test procedure only addresses the issue of the ATG system's <br />ability to detect leaks. It does not test the equipment for safety hazards. <br />tmw <br />I certify that the ATGS was installed and operated according to the vendor's instructions <br />2nd that the results presented on this form are those obtained during the evaluation. I <br />21so certify that the evaluation was performed according to one of the following: <br />standard EPA test procedure for ATGS <br />alternative EPA test procedure for ATGS <br />)ra <br />(printed name) <br />KWnature) <br />April 23. 1992 <br />(date) <br />ATGS - Results Form <br />Midwest Research InstitutC <br />,(organization performing evaluation) <br />425 Volker Blvd., Kansas Citv.- MO 64110 <br />(city, state, zip) <br />(816) -153-7600 <br />(phone number) <br />