Laserfiche WebLink
12/02/98 <br />13:41 Nu.es� U01 <br />When the sensor detects liquid, it sends an alarm <br />signal to the TLS console monitor, where both <br />o visual and audible built-in alarm indicators immedi- <br />ately identify the location of the problem. You can <br />then quickly take action to help prevent serious <br />c safety and environmental, problems. <br />t. <br />-35 <br />For even greater warning capability, the TLSW <br />TLS -350, ILS -350, TLS -3001, TLS -250i and ILS -250 <br />feature internal alarm relays that can also trigger <br />on-site alarms. With the TLS -350R, TLS -350 and <br />TLS -3001, alarm signals from the sump sensor <br />trigger a leak report showing the time and location <br />of the alarm condition. The information is Stored In <br />the system's Alarm History and can be printed on <br />the monitor's integral printer, or retrieval remotely <br />through its data communications interface. <br />positive Alarma y a: of .: <br />nY <br />Liquid in Underground Fuela <br />xr <br />Tank Piping Sumps <br />► For TLS -3508, TLS -350, ILS -350, TLS -300i, <br />TLS -250i and ILS -250 UST Monitoring <br />Systems. <br />► System Indicators Pinpoint Alarm <br />Location. <br />► Simple to Install. <br />► Two -wire Connection to System Monitor. <br />► Complete with All Mounting Hardware. <br />Fast Action Helps Prevent Serious Safety and <br />Environmental Problems <br />The Veeder-Root Piping Sump Sensor detects the <br />presence of liquid in a UST piping sump. Liquid <br />presence could mean a dangerous line leak. <br />Simple to Install <br />The Veeder-Root Piping Sump Sensor can be used <br />in the piping sumps of either steel or fiberglass <br />tanks. Each sensor comes with complete hardware <br />for mounting on existing conduit or piping. Only two <br />wires are required to connect the sensor to a TLS <br />or ILS system. <br />DESCRIPTION <br />Sump Sensor Assembly <br />Mounting Strips <br />Watertight Cord Grip_ <br />3 1 Screws for <br />