Laserfiche WebLink
• • • <br />A clearplastic coverprovided • r protection. • • • be - • _ • <br />when <br />nit the <br />After the completion of • replace the cover and - _ two mounting <br />The Leak Alert system has provide a set of SPDT master relay contacts. These are for <br />applications such as a remote alarm, automatic telephone dialer, or product pump shut down <br />control, etc. This master relay is mounted on the mother board and it is activated by any alarm <br />signal from any of the individual monitoring channels. Connections for the master relay contacts <br />are located on the Input Power Terminal Block found at the bottom of the enclosure. Refer to <br />Sea 11.1.8 Pg 2. The relay connections are marked COM for the arms of the relay, NO for the nor- <br />mal open contact, and NC for the normal closed contact. The relay contacts are rated 5 Amps. <br />115 VAC. <br />111.8. POWER INPUT WIRING <br />The Leak Alert system operates from a standard• .• HZ power <br />• _ •• • • <br />ground wire. All wiring should comply with local electrical codes. A fuse rated at 2 Amps. 115 VAC <br />is provided • protection. <br />Refer to Section 11.4., INTERNAL ELECTRICAL WIRING Page 14 for wiring schematic. <br />22 <br />