COMPLIANCE INFO_1986-2005 - Laserfiche WebLink

Home Browse Search

MONITWJNG SYSTEM CERTIFIQlMON se By All Jurisdictions Within the State of Califo Authority Cited. Chapter 6.7, Health and Safety Code, Chapter 16, Division 3 Title 21,alifomia Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility, a separate certification or regort must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General Information Facility Name: LODI Site Address: J110 W. TURNER RD City: LODI CA Zip: 95242 Contact Phone No: 815-2115 Date of Testing/Service: 07/22/2004 Facility Contact Person: DELL Make/Model of Monitoring System: LEAK ALERT Work Order Number: 2231505 B. Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced Tank ID: 1 Tank ID: In -Tank Gauging Probe. Model: In -Tank Gauging Probe. Model: X Annular Space or Vault Sensor. Model: LS 1 Annular Space or Vault Sensor. Model: X Piping Sump/Trench Sensor(s). Model: LS 1 Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: -H Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). Other (specify equipment type and model in Section E on page 2). TanklD: TanklD: in -Tank Gauging Probe. Model: In -Tank Gauging Probe. Model: Annular Space or Vault Sensor. Model: Annular Space or Vault Sensor. Model: Piping Sump/Trench Sensor(s). Model: Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). Other (specify equipment type and model in Section E on page 2). Dispenser : Dispenser ID: Dispenser Containment Sensors) Model: Dispenser Containment Sensor(s) Model: Shear Valve(s). Shear Valve(s) ® Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: Dispenser ID: QDispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s). Model: ® Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: Dispenser ID: Dispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s). Model ® Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). . If the facility contains more tanks or dispensers, copy this form. Include information for every tank and dispenser at the faciiity. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' guidelines. Attached to this certification is information (e.g manufacturers' checklists) necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports, I have also attached a copy of the (Check all that apply): ❑ System set-up ❑ Alarm history report Technician Name (print): RHOME DESBIENS Certification No.: 3083 License. No.: Testing Company Name:Tanknology Phone No.: (800) 800-4633 Site Address: 8900 Shoal Creek, Bldg. 200 Austin, TX 78757 Date of Testing/Servicing: 07/22/2004 Signature: Monitoring System Certification Page 1 of 3 Based on CA form dated 03/01