COMPLIANCE INFO_1991-1994 - Laserfiche WebLink

Home Browse Search

E ST, Easy, Economical Installation Lightweight RED THREAD II pipe is available in 15 and 30 ft. random lengths. The easy-to-use T.A.B." Joint, standard on UL/ULC RED THREAD II pipe, promotes fast positive makeup and prevents "backout" problems during cure time. The combina- tion of light weight, VIA i(I.+ �" bility and easy joining assures econo- mical installation. Joining system The exclusive T.A.B. (Threaded and Bonded) Joint is factory installed. It is the standard joining system for UL/ULC Listed RED THREAD 11 pipe. Spigotand bonded -on coupling ends are threaded with special profile double -lead threads. Combined with adhesive at time of assembly, the T.A.B. Joint is also fast and easy to install. The standard joining procedure for field -made epoxy bonds is achieved by the mechanical locking action Of matching bell and spigot taper angles. Fittings compatible with the product piping are also listed by Underwriters Laboratories for use in underground handling of petroleum products. When connecting containment pipe and fittings, plain ends of the containment pipe are machined or thoroughly sanded to accept the two-piece U L/U LC Listed containment fitting;: Containment pipe must be positioned over the product piping prior to assembly and bonding of the product pipe system. Upon completion of a successful prod- uct pipe test procedure, the secondary containment fittings may be installed. The system -matching adhesive is applied to all bonding surfaces, and the fitting halves are then joined and bonded. Proper assembly and bonding proce- dures are detailed in Smith Fiberglass Products installation manual 1055 for product piping and manual 1190 for secondary containment piping. Or, con- tact your local Smith Fiberglass Products distributor for a video presentation. Special two-piece containment fittings allow the product piping to be tested before the system is sealed. Nominal Pipe Sirs Nominal NominalNominal O.D. I.D. Nominal Wag Weight Pressure -Temp. MIII Yat Preasure External Pressure MaL Rating psig/MPa at Random lengths 75 -F/24 -C 150 -F/68 -C In. In./mm In./mm ht./mm tiffs.-R./kg-m Max. Rag" Psi9 2.375 2.235 0.070 0.4 250 prig @ 150° F 1000 112 106 15 30 2 60.33 56.77 1.78 0.60 1.72 MPa @ 66.5- C 6.89 .77 .73 4.6 9.1 3.500 3.360 0.070 0.6 175 prig @ 150- F 700 29 23 15 30 3 88.90 85.34 1.78 0.89 1.21 We @ 66.5- C 4.83 .20 .16 4.6 9.1 4.5W 4.360 0.070 0.8 125 psig @ 150- F 500 24 23 15 30 4 11430 110.74 1.78 1.19 0.86 MPa @ 66.5* C 3.45 17 .16 1 4.6 9.1 1' All valu � � "� 1 !►Jtlnlmuitt ,, 4� . , ko.t.. sd,f F14erglasta Pra�utlls lna - ,;