Laserfiche WebLink
r <br /> UST SYSTEM PRINTSEt INFORMATION <br /> 1, y Four complete sets of plans (To include specification sheets and/or equipment brochures If not on file). <br /> 2, v_ Plans drawn to scale in non-erasable print. <br /> V Plot plan to show location and number of tanks. <br /> Tank cross-sectional diagram included on prints submitted. <br /> 5, Detail of tank, piping system, excavation and cover. <br /> Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, Subchapter 16, <br /> Article 3, Sec. 2631 (r) & 26351 <br /> Verification of product compatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silicone glues, etc. [Section 2635 (b) (2)) <br /> g, Manufacturers written installation instructions for tank(s), piping, monitoring devices, etc. [Section 2635 tbD (S)I <br /> 9, Tightness Test (NEPA 30) Is required on both primary (io) and secondary (20) containment system before covering. <br /> [Section 2635 (b) (6) & (7)) <br /> Double welted tanks using pressure or vacuum testing to monitor the annular space. [Section 2635 (b) (7)) <br /> ✓' NFPA 329 "Precision test" required upon completion of installation with tank in operating condition. Test results to <br /> be submitted directly to PNS/ENO from the testing company or owner of facility. [Health & Safety Code, Division 20, <br /> Chapter 6.7, Section 25291 (g)l <br /> 12. TANK COMPOSITION <br /> TANK 0 0 I g � 0 0 0 <br /> CAPACITY ' ; i)) L1. Ca L- Cid <br /> MANUFACTURER C 1, 6 C (" <br /> COMPOSITION Et(i I � ��> rL12c ` <br /> MODEL I C <br /> PRODUCT C,r I i C ClC I <br /> CORROSION PROTECTION <br /> U.L. LISTED <br /> COMPATIBILITY WITH 100% <br /> METHANOL l "� <br /> 13. TANK(s) TO NE INSTALLED <br /> A. Steel-clad with fiberglass reinforced plastic. <br /> Holiday test required immediately before "setting" tank(s) (35,000 - 40,000 volts). [Section 2635 (b) (4)1 <br /> C. Fiberglass [Sections 2635 (3) and 2631 (p)) <br /> (1) Striker plate dimensions and materials. <br /> _ (2) Striker plate under alt accessible openings. <br /> (3) Installation instructions require an air test and soap bubble test prior to installation. <br /> [,!/A D. Non-clad steel tank [Section 2635 (b)l <br /> (1) Cathodic protection provided for entire tank, piping and components (ruts, bolts, washers, <br /> etc.). <br /> (2) Approved by a corrosion engineer or N.A.C.E. technician. <br /> (3) Document stating inspection method and frequency(minimum semi-annual inspection requirement). <br /> 4 <br />