Laserfiche WebLink
• Monitoring System Certification-Page 2 of 3 <br /> e <br /> Site Address: 6633 Pacific Ave Date of Testing/Servicing: 3/15/10 <br /> D. Results of Testing/Servicing <br /> Software Version Installed. 328.03 <br /> Com tete the foliowin checklist: <br /> •Yes ❑ No* Is the audible alarm operational? <br /> •Yes ❑ No* Is the visual alarm operational? <br /> •Yes ❑ No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> •Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their pE2per o eration? <br /> •Yes ❑ No* If alarms are relayed to a remote monitoring station, is all communications equipment(e.g.modem) <br /> ❑ N/A operational? <br /> M Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br /> ❑ N/A monitoring system detects a leak,fails to operate, or is electrically disconnected? If yes: which sensors initiate <br /> positive shut-down? (Check all that apply) Q Sump/Trench Sensors; M Dispenser Containment Sensors. <br /> Did you confnm 2ositive shut-down due to leaks and sensor failure/disconnection? M Yes ❑No <br /> ❑Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e. no <br /> M N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> fill point(s)and o eratingproperly? If so,at what percent of tank capacity does the alarm trigger? 0 % <br /> ❑Yes* M No Was any monitoring equipment replaced?If yes,identify specific sensors,probes,or other equipment replaced <br /> and list the manufacturer name and model for all replacement parts in Section E,below. <br /> ❑Yes* M No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br /> ❑ Product;❑ Water. If es,describe causes in Section E,below. <br /> Yes 13No* Was monitoringsystem set-u reviewed to ensure proper settings? Attach set-upMor i a licable. <br /> M Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? <br /> *In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: <br />