Laserfiche WebLink
6. Tanks subject to floatation. (Section 2635 (a) (7)l <br />A. Anchored by deadman or slab. <br />B. Anchors to be installed as specified by manufacturer. <br />C. Installation details provided on plans. <br />D. Calculations provided. <br />17. SPILL AND OVERFILL PREVENTION <br />Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spit. <br />_ <br />containers)/piping sump(s) required, including tank fill and all openings). <br />A. <br />Spill container (Section 2635 (b) (1)l. <br />If made of metal, exterior wall protected from galvanic corrosion. <br />x <br />Capacity: (minimum of five gattons) <br />Equipped with a drain valve which allows drainage of spill into primary container. <br />Manufacturer: QCGO 11 Po JV1 ECCE <br />8. <br />Overfill prevention system does not allow for manual override and meets one of the following requirements: <br />p <br />(1) Alert transfer operator at 90% full by restricting the flow into the tank or triggering an audibt_ <br />_ <br />and visual alarm (Section 2635(b)(2)(A)l . <br />K YES No <br />Manufacturer: Model: <br />YES No <br />(2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more than <br />_ <br />95% capacity and activates an audible alarm at least five minutes before overfill ESection 2635 <br />(b) (2) (B)l. <br />Manufacturer: Model: <br />(3) Provide positive shut off at no more than 95% capacity (Section 2635 (b) (2) (C)l. <br />Manufacturer: Model: <br /><4> Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not <br />exposed to the product overfilling ESection 2635 (b) (2) (D)l. <br />Manufacturer: > w-0 tq—' bI / Model: A I/ CO <br />18. PIPING INFORMATION <br />PIPING INFORMATION <br />TANK# <br />TANK# TANK# TANK# <br />DISTANCE from <br />DISPENSER to TANK <br />MANUFACTURER <br />SYSTEM TYPE <br />CONSTRUCTION *1P <br />Dov�eL6 044- L <br />MATERIAL "' <br />p <br />LEAK DETECTION SYSTEM <br />100% METHANOL COMPATIBILITY <br />K YES No <br />CORROSION PROTECTION <br />YES No <br />* System Type; suction, pressure, and gravity <br />** Construction: single -waded, double -walled, lined -trench, etc. <br />*** Material Type; steel with cathodic protection, stainless-steet, fiberglass reinforced plastic. <br />7 <br />