Laserfiche WebLink
7/27/2010 MSR 10-7-A <br /> Veeder-Root announces the availability of In-Station Diagnostics (ISD) and Pressure <br /> Management Control (PMC) versions 1.03 & <br /> CARB Approval of Single Dispenser Shut-down <br /> 1.0 Purpose <br /> Veeder-Root announces the avail ability of ISD and PMC versions 1.03 and Single Dispenser Shut- <br /> down. These product enhancements provide the following customer benefits: <br /> 1. ISD 1.03: <br /> - Improved collection monitoring performance. <br /> 2. PMC 1.03: <br /> - Removal of 24 hour pressure alarm for PMC only(non-ISD) sites. <br /> - Return to automatic control from manual control of Vapor Valve, 4 hours after setting <br /> to manual control. <br /> 3. Single Dispenser Shutdown: <br /> - Allows programming the console to either shut-down the entire site (STP)or <br /> individual dispensers that are affected by Vapor Collection ISD alarms*. <br /> * Pressure related ISD alarms will still shut down the entire site. <br /> 2.0 Equipment Description <br /> ISD 1.03 and PMC 1.03 <br /> - Version 30 TLS-350 software <br /> - All other PMC and ISD requirements remain the same <br /> Single Dispenser Shut-down <br /> - ISD version 1.03 on Executive Order 204 Revision H and Executive Order 202 <br /> Revision M <br /> - Single Dispenser Shutdown will be available on existing IS D versions 1.01 and 1.02 <br /> currently installed in the field pending CARB approval letter. <br /> - Each Dispenser Controller Module mounts in the high power compartment of the <br /> TLS-350 and is capable of handling up to four dispensers per module. Each <br /> controller module has four 10 am p relays on it. For sites with more than four <br /> dispensers, additional modules will be required. <br /> If you are upgrading to software ISD 1.03 a cold start is required. If you are only upgrading to <br /> Single Dispenser Shutdown with ISD versions 1.01 and 1.02 to your existing site, a cold start is not <br /> required. <br /> 1 <br />