Laserfiche WebLink
12. <br />TA NK COMPOSITIQN <br />WU <br />CORROSION RIM,, <br />PROTECMki <br />COMPATIBILITY <br />WITH 00 <br />13. TANK(s) TO BE INSTALLED <br />A. Steel -clad with fiberglass reinforced plastic coatings, composites, or equivalent non-metallic exterior <br />coatings or coverings. <br />_ (1) Tested at the installation site using an electric resistance holiday detector. <br />(2) Vacuum applied to interstitial space. <br />B. Fiberglass <br />(1) Installation instructions require an air test and soap bubble test prior to installation. <br />(2) Vacuum applied to interstitial space. <br />(3) Hydrostatic annular (primary tank pressure test). <br />5 <br />UST SYSTEM DRAWING <br />INFORMATION <br />0 1. <br />Three complete sets of plans (include manufacturer's specification sheets for proposed equipment to be <br />installed). <br />2. <br />Plans drawn to scale in non -erasable print. <br />3. <br />Plot plan to show location of tanks and all associated piping. <br />4. <br />__ <br />Striker plates or drop tube -mounted bottom protectors illustrated below all accessible openings. <br />5. <br />__ <br />Tank cross-sectional diagram. <br />6. <br />_ <br />Detail of tank, associated piping, excavation and cover. <br />7. <br />__ <br />Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, Chapter 16, <br />Article 3, Section 2631 (b) & 2635] <br />8. <br />Verification of product compatibility with the tank(s), piping, monitoring <br />device(s), epoxy or silicone glues, etc. <br />9. <br />_ <br />Manufacturer's written installation instructions for t nknk(s), piping, monitoring devices, etc. <br />10. <br />____ <br />At the installation site, prior to installation, a tightness test shall be performed on both primary (1 ) and secondary <br />(2) containment systems before covering. [Section 2635 (a) (3) & (4)] <br />11. <br />____ <br />Tank integrity test required upon completion of installation with tank in operating condition. Test results to be <br />submitted directly to EHD from the testing company or owner of facility. [Health & Safety Code, Division 20, <br />Chapter 6.7, Section 25291 (h)] <br />12. <br />TA NK COMPOSITIQN <br />WU <br />CORROSION RIM,, <br />PROTECMki <br />COMPATIBILITY <br />WITH 00 <br />13. TANK(s) TO BE INSTALLED <br />A. Steel -clad with fiberglass reinforced plastic coatings, composites, or equivalent non-metallic exterior <br />coatings or coverings. <br />_ (1) Tested at the installation site using an electric resistance holiday detector. <br />(2) Vacuum applied to interstitial space. <br />B. Fiberglass <br />(1) Installation instructions require an air test and soap bubble test prior to installation. <br />(2) Vacuum applied to interstitial space. <br />(3) Hydrostatic annular (primary tank pressure test). <br />5 <br />