Laserfiche WebLink
LIN <br />Sump Sensor <br />The Piping Sump Sensor is installed in a tank piping sump and will .detect the presence of a liquid. Liquid level is <br />monitored by a float /magnetic reed switch sensing system. <br />Sensor Detection Capabilities - Alarm Conditions <br />• Fuel alarm is triggered when';liquid reaches a nominal height of 1 -inch. <br />• An open sensor triggers a Sensor Out alarm. <br />Operating Capabilities <br />• Operating temperature r� <br />• Storage temperature. ran <br />• Sensor dimensions: 12" 1 <br />Sensor./Cable Length I <br />., S•l' ump Sensor w/ 12 foot <br />• Sump Sensor w/ 30 foot <br />'Sensors 794380-208 and <br />Sensor Interface Modu <br />• TLS -350 series consoles <br />accepts up to 8 sensors ( <br />• TLS -350J console - 3 ser <br />• TLS-300/PC-300 series c <br />• ILS -350 console - A Two - <br />could be monitored by the <br />• TLS -450 - USM (P/N 332 <br />ge: 0 to +60°C. <br />-40 to +7000. <br />]hj 1.9" diameter. <br />)0figuratio s <br />bl'e - Form Number 794380-2081 <br />ibl'e - Form Number 794380-2091 <br />?9'are direct replacements for sump sensor 794380-205. <br />a <br />4� <br />axcept TLS -380J) - Interstitial/Liquid Sensor interface module (P/N 329358-001)' <br />maximum of 64 sensors could be monitored by the console). <br />ors max. <br />insoles (no interface module required) - 8 sensors max. <br />lir Module (P/N 329675-001) accepts up to 4 sensors (a maximum of 16 sensors <br />console). <br />12-001), accepts up to 16 sensors <br />Console Software Compatibility <br />• TLS -350 series/TLS-300 (Version 1 or later) <br />• ILS -350 (All) <br />• TLS -450 (All) <br />• Unleaded gasoline <br />• Unleaded with up to 5% methanol, <br />15% ethanol, or 15% MTBE <br />• Leaded gasoline <br />• Diesel <br />• Kerosene <br />• Jet fuel <br />• Aviation gasoline <br />Related Sales Literature <br />Visit our website at www.veeder.com <br />for more information on Veeder-Root <br />products and services. <br />-Existing conduit <br />or piping <br />Cable to junction box Cable to junction <br />and seal -off box and seal -off <br />`Sump sensor should: <br />1. Rest on the base of the sump. <br />2. Be positioned as close to outer <br />wall as possible. Sump sensor` <br />3. Be mounted in a true vertical (installation examples) <br />position. <br />4. Be installed only in a dry sump. <br />Sump base <br />t•1 <br />Product <br />pipe <br />