COMPLIANCE INFO_2012-2018 - Laserfiche WebLink

Home Browse Search

0 SWRCB, January 2002 Page of 7. UNDER -DISPENSER CONTAINMENT UDC TESTING Test Method Developed By: ❑ UDC Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Spgcify) Test Method Used: ❑ Pressure ❑ Other (Specify) ❑ Vacuum X Hydrostatic Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 UDC # 1&2 UDC # 3&4 MEEMESEEMEMEEM UDC # UDC # UDC Manufacturer: Unknown Unknown UDC Material: Poly Plastic Poly Plastic UDC Depth: 16" 16" Height from UDC Bottom to Top of Highest Piping Penetration: Enters from bottom Enters from bottom Height from UDC Bottom to Lowest Electrical Penetration: Enters from bottom Enters from bottom Condition of UDC prior to testing: Dry Dry Portion of UDC Tested Water Level 14" Water Level 14" Does turbine shut down when UDC sensor detects liquid (both product and water)?* Yes Yes Turbine shutdown response time Not Alarmed Not Alarmed Is system programmed for fail- safe shutdown?* Yes Yes Was fail-safe verified to be operational?* No No Wait time between applying water and starting test 5 Minutes 5 Minutes Test Start Time: 10:45 10:50 Initial Reading (RI): .001 .001 Test End Time: 11:15 11:20 Final Reading (RF): .001 .001 Test Duration: 30 Minutes 30 Minutes Change in Reading (RF -RI): 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes Test Result: X Pass ❑ Fail X Pass ❑Fail ❑ Pass ❑ Fail 0 Pass `,'❑ Fail Was sensor removed for testing? X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA ❑ Yes []No ❑ NA ❑ Yes ❑ No ❑ NA verified functional after testing? Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) 1 If the entire depth of the UDC is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)