Laserfiche WebLink
• <br />6. Overfill Protection System (spill catchment basin(s) required) <br />A. Nonmotor vehicle fuels (See Option <br />1. Level sensing device and #2 or <br />2. Audible/visual alarm triggered <br />3. Automatic shut-off device <br />�)l <br />Motor vehicle fuels only.. Manual monitoring <br />#3 below <br />to liquid level sensor <br />Secondary containers (includes leak interception and detection systems).. <br />A. Backfill in secondary container - _Article 3, Section 2635) <br />1. See Article 3 Section 2635(c) (1-8). <br />B1 Two or more primary containers within secondary .container (Demonstrate <br />a. Written filling procedure provided <br />b. Procedure addresses all of the following: <br />1) Visual monitoring of fuel level and filling operation <br />2) Available capacity of tank is at 103% or +200 gallons <br />v i. minimum 5 gaiions <br />10. <br />IA) <br />.. <br />product compatibilities). <br />C. Liquids detected in secondary containment must be sampled and analyzed for <br />hazardous substances. (Article 3, Section 2635(6) and Health and Safety <br />Code 25291(e)(h). <br />D. Water tight cover for secondary container excavation (Article 3, Section <br />2635(7)). <br />11. Piping <br />A.. ble containment required for: <br />Product and lines. <br />Vent line (excluded only if ball float valve is installed). <br />