COMPLIANCE INFO_1990-2003 - Laserfiche WebLink

Home Browse Search

OPW 60 VS SERIES VAPOR LINE SHEAR VALVES The 60VS Series is similar to the 60V Series of Vapor Line Shear Valves. They are designed to break at the shear groove in the event the dispenser is dislodged, helping to pre- vent damage to underground piping. However the 60VS Series has addition- al features not found in the 60V Series. The 60VS Series has a 1" connection at the inlet for dispenser piping and an 1 Ih-" at the outlet end to accommodate 1 �5_" underground vapor lines. An air test port is also included to give access to the vapor lines without breaking pipe joints. At the dispenser inlet end, two connections are available (offering a convenience of choice for installa- tions). A connection through the top of the valve or the side may be made. A plug is shipped with the valve in order to plug off the opening not used. The mounting connection, below the shear groove, has three drilled and tapped holes for mounting to a stabiliz- - bar. All 60V and 60VS models have all important mounting connection .dove the shear groove as well. Mounting above the shear groove is important on vapor lines because of the use of flexible pipe above this point. The shear section must be isolated so that it is the weak point in the line. OPV 60VS-1000 "Line Saver" Same features as the 60V-1000 plus; + 11h" connection to underground PIPIng + Air test port to enable vapor line testing without breaking pipe connections + Choice of top or side inlet connection + Stabilizer mounting connection OPW 60VSP-1001 "Vapor saver" Same features as the 60VS-1000 plus; Double-poppeted design helps )revent vapor loss in the event the dispenser is toppled OPV 60VSK-1001 "Vapor Saver with Containment Threads" Same features as the 60VSP-1000 plus; + Externally threaded on outlet end for secondary containment connection of underground piping Materials Body: cast iron Discs: M-19 Inlet thread size: l" NPT internal threads Outlet thread size: 11h" internal threads Ordering Specifications Product No. Length in. mm. 60VS-1000 631/32" 177 60VSP-1001 631/32" 177 60VSPGl001 Dimensions 63%32" 177 in. mm. A 111/32' 34 B 631/32" 177 C 211/16" 68 D 11/i' 38 1 227/32' 73 F 111/16" 43 G 215/16" 75 IMPORTANT: OPW products should be used in com- pliance with applicable federal. state and local laws and regulations. Product selection should be based on ph%sisal specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS FOR A PARTICULAR USE. All illustrations and specifica- tions in this literature are based on the latest product information available at the time of publication, OPW resines the right to make changes at any time in prices, materials, specifications and models and to discontinue models without r_�, or obligation.