Laserfiche WebLink
JUN-20-2011 07:45 Service Station Systems 408 938 8888 P.12 <br /> 12. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With rill Riser Containment Sumps ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested Q <br /> Test Method Developed By: ❑Sump Manufacturer ®Industry Standard i7 Professional Engineer <br /> ®Other(Specify) <br /> Test Method Used: ❑Pressure ❑Vacuum M Hydrostatic <br /> ®Other(Spec) <br /> Test Equipment Used: [neon Sump Tester Equipment Resolution: +/-0.002" <br /> Fill Sume#87 Fill-SUME#89 Fill Sump#91 Fill Sump#Diesel <br /> Sum Diameter: 42" 42" 42" 42" <br /> Sum Depth: 82" 82" 82" 82" <br /> Height from Tank Top to Top of N/A N/A N/A N/A <br /> Hi est Piping Penetration. <br /> Height from Tank Top to Lowest 24" 24" 24" 24" <br /> Electrical Penetration: <br /> Condition of sump prior to Good Good Good Good <br /> testing: <br /> Portion of Sump Tested 2"above i in 2"above piping 2"above piping 2"above piping <br /> Sump Material: FibeEglass Fiber Iass Fiberglass Fiberglass <br /> Wait time between applying <br /> pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes <br /> starting test: <br /> Test Start Time: 8:11 am 8:11 am 8:11 am 8:11 am <br /> Initial Readin W: 3.8838 3.3982 3.7636 1.0956 <br /> Test End Time: 8:26 am 8:26 an 8:26 am 8:26 am <br /> Final Readin RF): 3.8844 3.4000 3.7633 1.0967 <br /> Test Duration: 15 min. 15 min. 15 min. 15 min. <br /> Change in Reading(Rr-Rt : +0.0006 +0.0018 -0.0003 +0.0011 <br /> Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002" +/-0.002" +/-0.002" <br /> Test Result: M Pass 0 Fail M Pass ❑Fail ® pass D Fail ® Pass 0 Fail <br /> is there a sensor in the sump? a Yes ❑No ® Yes ❑No ® Yes ❑No ® Yes ❑No <br /> Does the sensor alarm when <br /> either product or water is p Yes D No ®NA ❑Yes El No ®NA D Yes❑No ®NA ❑Yes❑No ®NA <br /> detected? <br /> Was sensor removed for testing? ®Yes❑No ❑NA ®Yes❑No ❑NA 14 Yes❑No ❑NA ®Yes p No ❑NA <br /> Was sensor properly replaced and ®Yes❑No 0 NA C!lyes Q No ONA ®Yes❑No ❑NA ®Yes❑No ❑NA <br /> verified functional after testing? <br /> Comments-(include information o"repairs made prior to testing, and recommended follow-up for aided tests) <br /> "Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment testing scope of work". <br /> TOTAL P.12 <br />