Laserfiche WebLink
YLg' <br />VENTILATE YOUR <br />AREA. WEAR MASK, > ELECTRIC TOOLS <br />SAFETY GLASSES, NO > IGNITION SOURCES <br />GLOVES AND OTHER <br />PROTECTION <br />Ensure that the workspace is operating below <br />the LEL (lower explosive limit). Test regularly <br />or monitor continuously. <br />BRAVO RECOMMENDS THAT AT A MINIMUM, <br />■ all flexible entry fittings on a sump are retrofit with the <br />F -Series Retrofit -S fitting. Having every entry fitting <br />FJOTEM sealed with fuel -compatible epoxy will ensure the best <br />test results. <br />WARRANTY IS VOID <br />OR YOUR CERTIFIED STATUS <br />WILL BE REVOKED: <br />IF ANY OF THE FOLLOWING OCCUR <br />A) NOT Installing an F -Series Retrofit S fitting specifically with Bravo EP100-RF epoxy kits. <br />B) Installing a F -Series Retrofit -S fitting with epoxies that are not specified in this manual. <br />C) F -Series Retrofit -S Fittings are NOT installed by a Bravo Certified Contractor. <br />D) Installing a F -Series Retrofit -S fitting on Polyethylene sumps or flexible pipe. <br />E) Installing a F -Series Retrofit -S fitting without monitoring lower explosive limit. <br />3 ii -F -Series -Retrofit -S -15A <br />