Laserfiche WebLink
STEP 6 <br /> SPACKLE THE INTERIOR <br /> SOLID WITH ADHESIVE. <br /> FLUSH ON ALL EDGES <br /> ADHESIVE APPLIED TO <br /> ALL CONTACT SURFACES <br /> rt <br /> I 111111iji Ill III Ili <br /> W'D <br /> J41 t; 2017 <br /> FOR CURVED WALLS: ENVIPIONMENTAL HSALTH <br /> Apply Bravo adhesive to all Contact Surfaces; between both halves <br /> of the curved flange or wedge where they contact each other, the pipe, the wall, <br /> and the face of the flange that will contact the wall. Stick this assembly to the <br /> wall by firmly applying manual pressure. Make sure to align the marked stripe. <br /> Use provided zip-tie to lock these halves together tightly. In weather below 90°F <br /> this should remain in place without any assistance while you prepare the body <br /> for gluing. <br /> 11 ii-F-Series-Retrofit-S-13B <br />