COMPLIANCE INFO_2016-2017 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 2 of 3 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ®Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic ❑Other(Spec) Test Equipment Used: INCO N TS-STS Equipment Resolution: +/-0.002" rMMSump# T5-91 STP Sump# Sump# Sump# Sumpeter: 42" h: 82" Sump Material: Fiberglass Height from Tank Top to Top of 15" 40V 15 Z01 Highest Piping Penetration: Height from Tank Top to Lowest49„ E VIRON Electrical Penetration: pERMITISERVICES Condition of sump prior to testing: Dry Portion of Sump Tested' 55" Does turbine shut down when sump sensor detects liquid(both ❑Yes []No X NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?* Turbine shutdown response time N/A Is system programmed for fail-safe ❑Yes ❑No ®NA []Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [I NA shutdown?` Was fail-safe verified to be operational?* 11Yes []No ®NA ElYes 11No ❑NA ❑Yes L]No ❑NA F]Yes F]No ❑NA Wait time between applying pressure/vacuum/water and starting 15 Minutes test: Test Start Time: 9:21 am Initial Reading(R;): 4.7820" Test End Time: 9:36am Final Reading(RF): 4.7803" Test Duration: 15 Minutes Change in Reading(RF-RI): -0.0017" Pass/Fail Threshold or Criteria: +/-0.002" Test Result: LKJ Pass ` ❑Fail ❑ Pass ❑Fail ❑ Pass ` ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? ®Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No LXl NA ❑Yes ❑No ®NA Was sensor properly replaced and ®Yes ❑No ❑NA []Yes ❑No [INA ❑Yes []No ®NA ❑Yes ❑No ®NA verified functional after testin ? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) T5-91 STP Sump is now passing hydrostatic testing, &will be back on normal SB989 schedule now. ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)