Laserfiche WebLink
• <br /> .UST SYSTEM DRAWING INFORMATION <br /> 1. X Three complete sets of plans (include manufacturer's specification sheets for proposed equipment to be installed). <br /> 2. X Plans drawn to scale in non-erasable print. <br /> Site <br /> 3. X Piot plan to show location of tanks and all associated piping. <br /> 4. X Striker plates or drop tube-mounted bottom protectors illustrated below all accessible openings. <br /> 5. X Tank cross-sectional diagram. <br /> 6. X Detail of tank, associated piping, excavation and cover. <br /> 7. X Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, Chapter 16, <br /> Article 3, Section 2631 (b) & 26353 <br /> g. �_ Verification of product compatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silicone glues, etc. <br /> 9. X Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. <br /> 10. X At the installation site, prior to installation, a tightness test shall be performed on both primary (10) and <br /> secondary (20) containment systems before covering. [Section 2635 (a) (3) & (4)] <br /> 11. XX Tank integrity test required upon completion of installation with tank in operating condition. Test results to be <br /> submitted directly to PHS-EHD from the testing company or owner of facility. [Health & Safety Code, Division 20, <br /> Chapter 6.7, Section 25291 (h)] <br /> 12. TANK COMPOSITION <br /> TANK # # 1 # 2 # # # <br /> CAPACITY 20,000 10 100O <br /> MANUFACTURER XERXES XERXES <br /> COMPOSITION FIBERGLAS FIBERGLAS �C, <br /> MODEL /viRegn <br /> i <br /> rCUti <br /> PRODUCT Unleaded Unleaded vl cad[ <br /> CORROSION PROTECTION FRP FRP <br /> U.L. LISTED YES YES <br /> COMPATIBILITY WITH 100% YES YES <br /> METHANOL <br /> 13. TANK(s) TO BE INSTALLED <br /> _NA A. Steel-clad with fiberglass reinforced plastic coatings, composites, or equivalent non-metallic exterior <br /> coatings or coverings. <br /> (1) Tested at the installation site using an electric resistance holiday detector. <br /> (2) Vacuum applied to interstitial space. <br /> X B. Fiberglass <br /> X (1) Installation instructions require an air test and soap bubble test prior to installation. <br /> X (2) Vacuum applied to interstitial space. <br /> (3) Hydrostatic annular (primary tank pressure test). <br /> NA C. Non-clad steel tank [Section 2635 (a) (2) (A)] <br /> (1) Cathodic protection provided for entire tank, piping and components (nuts, bolts, washers, <br /> etc.). <br /> (2) Field installed cathodic protection systems designed and certified as adequate by a <br /> corrosion specialist. <br /> (3) Impressed current systems to be inspected no less than every 60 days. <br /> 5 <br />