Laserfiche WebLink
t6.'! Tanks subject to flcatati (Section 2635 (a) (7), <br /> A. Anchored by deadman or slab. <br /> B. Anchors to be installed as specified by manufacturer. <br /> C. Installation details provided on plans. <br /> D. Calculations provided. <br /> 17. SPILL AND OVERFILL PREVENTION <br /> Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br /> container(s)/piping sunp(s) required, including tank fill and all openings): <br /> A. • Spill container (Section 2635 (b) (1)I. <br /> If made of metal, exterior wall protected from galvanic corrosion. <br /> Capacity: (minimum of five gallons) <br /> Equipped with a drain valve which allows drainage of sp tl into primary container. <br /> � y" <br /> Manufacturer: t- <br /> B. Overfill prevention system does not allow for manual override and meets one of the following requirements: <br /> (1) Atert transfer operator at 90% full by restricting the flow into the tank or triggering an audible <br /> and visual alarm (Section 2635(b)(2)(A)) . <br /> Manufacturer: Model: <br /> (2) Restrict delivery flow to the tank 30 minutes before overfill when tank is fitted at no more than <br /> 95% capacity and activates an audible alarm at least five minutes before overfill (Section 2635 <br /> (b) (2) (B)). <br /> Manufacturer: Model: <br /> (3) Provide positive shut off at no more than 95% capacity (Section 2635 (b) (2) (C)). <br /> Manufacturer: Model: A I <br /> (4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not <br /> exposed to the product overfilling (Section 2635 (b) (2) (D)). <br /> Manufacturer: Model: <br /> 18. PIPING INFORMATION <br /> PIPING INFORMATION TANK# TANK# 2 TANK# TANK# <br /> DISTANCE from B So j 1 <br /> DISPENSER to TANK <br /> MANUFACTURER <br /> SYSTEM TYPE <br /> CONSTRUCTION <br /> MATERIAL *'"' _ v� 1 <br /> LEAK DETECTION SYSTEM <br /> 100% METHANOL COMPATIBILITY YES NO <br /> CORROSI,ON PROTECTION YES NO <br /> * System.Type; suction, pressure, and gravity <br /> ** -Construetion: single-waited, doubte-walled, tined-trench, etc. <br /> *** Material Type; steel with cathodic protection, stainless-steel, fiberglass reinforced plastic. <br /> 7 <br />