COMPLIANCE INFO_1998-2006 - Laserfiche WebLink

Home Browse Search

MONITQMNG SYSTEM CERTIFIfikkTION se By All Jurisdictions Within the State of Califon Authority Cited: Chapter 6.7, Health and Safety Code; Chapter 16, Division 3 Title 23, California Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility, a separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General Information Facility Name: CHEVRON #208117 Site Address: 755 S. TRACY BLVD Facility Contact Person: MGR - MARIA -Make/Model of Monitoring System:VRTLS350 B. Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced City: TRACY Contact Phone No: 830-0370 Date of Testing/Service: 03/21/2005 Work Order Number: 2235304 CA Zip: 95376 Tank ID: 1 Tank ID: 2 R In -Tank Gauging Probe. Model: MAG X In -Tank Gauging Probe. Model: MAG X Annular Space or Vault Sensor. Model: 409 X1 Annular Space or Vault Sensor. Model: 409 X Piping Sump/Trench Sensor(s). Model: 352 Piping Sump/Trench Sensor(s). Model: 352 Fill Sum X p Sensor(s). Model: 208 Md Fill Sump Sensor(s). Model: 208 Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: PLLD X Electronic Line Leak Detector. Model: PLLD Tank Overfill/High-Level Sensor. Model: MECHANICAL X Tank Overfill/High-Level Sensor. Model: MECHANICAL Other (specify equipment type and model in Section E on page 2). Other (specify equipment type and model in Section E on page 2). Tank ID: Tank ID: in -Tank Gauging Probe. Model: In -Tank Gauging Probe. Model: Annular Space or Vault Sensor. Model: Annular Space or Vault Sensor. Model: Piping Sump/Trench Sensor(s). Model: Piping Sumprfrench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). Other(specify equipment type and model in Section E on page 2). Dispenser I D: 1/2 Dispenser ID: 3/4 -91 Dispenser Containment Sensor(s) Model: 208 _X-1 Dispenser Containment Sensor(s) Model: 208 X Shear Valve(s). X Shear Valve(s) Dispenser Containment Float(s) and Chain(s). 7 Dispenser Containment Float(s) and Chain(s). Dispenser lD: 5/6 Dispenser ID: 7/8 ® Dispenser Containment Sensor(s) Model: 208 71Dispenser Containment Sensor(s). Model: 208 ® Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: 9/10 Dispenser ID: 11/12 ❑X Dispenser Containment Sensor(s) Model: 11/12 X Dispenser Containment Sensor(s). Model: 208 Ir71 Shear Valve(s). X Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). " If the facility contains more tanks or dispensers, copy this form. Include information for every tank and dispenser at the facility. C. Certification 1 certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' guidelines. Attached to this certification is information (e.g manufacturers' checklists) necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports, I have also attached a copy of the (Check all that apply): XQ System set-up X❑ Alarm history report Technician Name (print): RAYMOND SIMMS Certification No.: Signature: License. No.: Testing Company Name:Tanknology Phone No.: (800) 800-4633 Site Address: 8501 N. MoPac Expressway, suite 400, Austin, TX 78759 Date of Testing/Servicing: 03/21/2005 Monitoring System Certi>rcation Page 1 of 3 Based on CA form dated 03/01