Laserfiche WebLink
Qty(, (, \/ <br />Valves and Fittings Manholes <br />Vapor Recovery Vents <br />Nozzles & Accessories Drop Tubes & FiIl Connectors <br />Gauges <br />a <br />Valves and Fittings <br />Emergency Shutoff Valve—FIG 636 Series <br />Required on underground tank motor fueling systems. The emergency shut-off valve or "impact <br />valve" is installed on the fuel line directly under the dispenser: It is intended to shut off the flow of <br />product in the event of impact and/or fire involving the dispenser. In normal operation, the valve is <br />left open, held in position by a fusible link. A shear section is located in the upper half of the valve <br />and should be installed level with the base of the dispenser. In an emergency, the handle releases <br />and the spring-loaded poppet assembly will swing shut. Unibody construction. UL listed. <br />Double Tapped Bushings—FIG 184 Series <br />Used in pipe and tank fitting to reduce or adapt to a connection. Cast iron with NPT <br />threads. The duplex bushing is used to connect 2" pipe to dual 1/2" or 3/8" lines. <br />Extractor—FIG 560 Series <br />Installed on the vent line of an underground storage tank. Extractor allows vent lines to be <br />manifolded and also allows removal of float vent valve (Fig. 317) for repair or replacement. <br />Various sizes available. CARB approved. <br />Float Vent Valve—FIG 317 Series <br />A main component of the Extractor/Float Vent Valve overfill prevention system. (Fig 560/317). <br />Installed on a UST vent line. When filling a tank, the ball floats on the liquid and rises to the seat <br />area on the pipe nipple `The level of the seat is set at the high level limit of the tank. Once seated, <br />air flow becomes restricted which abruptly reduces the filling rate and warns the operator to stop <br />filling the tank. <br />Extractor Pipe Cap—FIG 578 Series <br />Used as a cover for the Extractor/Float Vent Valve overfill system. Installed on the riser pipe at <br />grade level normally inside a manhole. <br />Ball Valve (full port)—FIG 691 <br />Full port ball valve used for liquid handling with manual open -close in quick quarter -turn handle <br />operation. Threaded (NPT) connections. Valve can be operated in partial open position. Lockable <br />with padlock. <br />http://R7v,7w.raorbros.coi3a/Senicf,--Station.htm <br />10/24/2003 <br />