Laserfiche WebLink
7-30-1998 2:33PM FROMP_8 <br />k <br />16: <br />11'7 <br />Tanks subject to floatat [Section 2635 (a) (7)I <br />A. Anchored by deadman or slab. <br />8. Anchors to be installed as specified by manufacturer. <br />C. Installation details provided on plans. <br />0- Calculations provided. <br />17_ SPILL AND OVERFILL PREVENTION <br />Fes, underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br />containers)/piping sump(s) required, including tank fill and all openings). <br />A� Spill container [Section 2635 <br />_ If made of metal, exterior wall protected from gaivenic corrosion. <br />Capacity: (minimum of five gallons) <br />Equipped with a drain valve which allows drainage of spill into primary container. <br />Manufacturer: <br />a. Overfill prevention system does not allow for manual override and meets one of the following requirements: <br />(1) Alert transfer operator at 90% full by restricting the flow into the tank or triggering an audible <br />and visual alarm [section 2635(b)(2)(A)l . <br />Manufacturer: Model: <br />4 AQ� <br />(2) Restrict delivery flow to the tank 30 minutes before overfiIL when tank is fiLLed at no more than <br />95% capacity and activates an audible alarm at Least five minutes before overfill [Section 2635 <br />(b) (2) (e)). <br />(3) <br />18. PIPING INFORMATION <br />Manufacturer: <br />Model: <br />Provide positive shut off at no more than 95% capacity [Section 2(635 (b) (2)/(C)7. <br />Manufacturer: / �Y�'' Modet: ll� �Jb 'YIUL-) ri 1 JQ ��"v <br />Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not <br />exposed to the product overfilling [section 2635 (b) (2) (0)l. <br />Manufacturer: <br />Model: <br />PIPING INFORMATION <br />TANK$ <br />TANK# TANK# <br />YANK# <br />DISTANCE from <br />DISPENSER to TANK <br />! <br />2 <br />MANUFACTURER <br />� � O � m / r# <br />SYSTEM TYPE * <br />LQ��j Ilii <br />CONSTRUCTION <br />MATERIAL <br />LEAK DETECTION SYSTEM <br />^IvM <br />100% METHANOL COMPATIBILITY <br />YES N <br />CORROSION PROTECTION <br />S <br />* System Type: suction, pressure, and gravity <br />Construction: single -walled, double -walled, lined -trench, etc. <br />"" Material Type; steel with cathodic protection, stainless-steel, fiberglass reinforced plastic. <br />