Laserfiche WebLink
San Joaquin County <br />Environmental Health Department <br />600 East Main Street <br />February 9, 2009 <br />Stockton, California 95202-3029 <br />Website: www.sjgov.org/ehd <br />Phone: (209) 468-3420 <br />Fax: (209) 464-0138 <br />DIRECTOR <br />Donna Heran, REHS <br />ASSISTANT DIRECTOR <br />Laurie Cotulla, REHS <br />PROGRAM COORDINATORS <br />Carl Borgman, REHS <br />Mike Huggins, REHS, RDI <br />Margaret Lagorio, REHS <br />Robert McClellon, REHS <br />Jeff Carruesco, REHS, RDI <br />Kasey Foley, REHS <br />Service Station Systems, Inc. Sent regular mail <br />680 Quinn Ave SR0056481 <br />San Jose CA 95376 <br />Attn: Marty Weithman Y I <br />RE: Chevron USA 755 S Tracy Blvd., Tracy CA 95376 C(DPY <br />The San Joaquin County Environmental Health Department (EHD) has completed the review of <br />the application for permit to perform a cold start at the above noted address. The permit has been <br />approved with the following conditions: <br />1. Contact the local fire department and the San Joaquin Valley Air Pollution Control <br />District for any applicable permits and requirements. <br />a. Functionality test to ensure that monitoring has been restored to meet the <br />requirements of California Code of Regulations Title 23 and the Health & Safety <br />Code. <br />2. The technician must print out a copy of the alarm history prior to performing the "cold <br />start" of the Veeder Root system and have the copy available at the time of EHD <br />inspection. <br />3. Qualified service technicians must possess or work under the direct and personal <br />supervision of an individual physically present at the work site who possesses all of the <br />following: <br />a. One of several permissible valid, current contractor's licenses issued by the <br />Contractors State License Board (may be issued to the installation company), and <br />b. A valid, current California UST Service Technician certificate issued by the <br />International Code Council (ICC), and <br />c. A valid, current certificate of training from the manufacturer(s) of the <br />component(s) being tested, repaired, or serviced, and <br />d. Each person installing or testing any component must hold a certificate of <br />training from the manufacturer of that component. <br />4. Permit expires 180 days from date of approval. Note: If an extension to the expiration <br />date is required, a written request must be submitted to this office prior to the expiration <br />date. <br />5. All components must be certified by an independent testing organization and labeled as <br />required by the organization. (UL, ULC, ANSI, API, ASTM, etc. See California Code of <br />Regulations (CCR), Title 23 Chapter 16 Table B for complete list). The component must <br />bear the appropriate mark as required by the independent testing organization. <br />6. Any changes in information and scope of work must be submitted to EHD for approval <br />prior to commencing work. All new addenda supersede the previous ones. <br />Page 1 of 2 <br />