Laserfiche WebLink
69#d§na .1%urnE <br />I 1• • • <br />AIIIA <br />Tank Piping Sumps <br />For TLS -350R, TLS -350, ILS -350, TLS -3001, <br />TL 2501 and ILS -250 UST Monitoring <br />o.- System Indicators Pinpoint <br />Location. <br />ation <br />ProblemsEnvironmental <br />The Veeder-Root Piping Sump'Sensor detects the <br />presence of liquid in a UST piping sump. Liquid <br />presence could mean a dangerous line leak. <br />When the sensor detects liquid, it sends an alarm <br />signal to the TLS console monitor, where both <br />visual and audible built-in alarm indicators immedi- <br />ately identify the location of the problem. You can <br />then quickly take action to help prevent serious <br />safety and environmental problems. <br />For even greater warning capability, the TLS -3508, <br />TLS -350, ILS -350, TLS -300i, TLS -250i and ILS -250 <br />feature internal alarm relays that can also trigger <br />on-site alarms. With the TLS -350R, TLS -350 and <br />TLS -3001, alarm signals from the sump sensor <br />trigger a leak report showing the time and location <br />of the alarm condition. The information is stored in <br />the system's Alarm History and can be printed on <br />the monitor's integral printer, or retrieval remotely <br />through its data communications interface. <br />910313m= <br />The Veeder-Root Piping Sump Sensor can be used <br />in the piping sumps of either steel or fiberglass <br />tanks. Each sensor comes with complete hardware <br />for mounting on existing conduit or piping. Only two <br />wires are required to connect the sensor to a TLS <br />or ILS system. <br />QTY <br />1 <br />DESCRIPTION <br />Piping Sump Sensor Assembly <br />2 <br />Mounting Strips <br />1 <br />Watertight Cord Grip <br />3 <br />Screws for mounting <br />