COMPLIANCE INFO_2007-2013 - Laserfiche WebLink

Home Browse Search

It Page of —4 Facility is Not Equipped With Fill Riser Containment Sums ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Spec) it Test Equipment Used: Wayne Perry Inc. See Attached Results Equipment Resolution: .0007" Sump qw;t Sump Sump Sump Sump Diameter: " Sump Depth: Sump Material:, Height from Tank Top to Top of Highest Piping Penetration: Height from Tank Top to Lowest Electrical Penetration: .36 J6 Condition of sump prior to testing: t Portion of Sump Tested' 2" ABOVE HIGHEST 2" ABOVE HIGHEST PENETRATION PENETRATION 2" ABOVE HIGHEST PENETRATION 2" ABOVE HIGHEST PENETRATION and starting test: Wait time between applying wag5Min 15 Minutes 15 Minutes 15 Minutes Test Start Time: Initial Readm I :Test End Time:Final Reading (RF): 9Test Duration: 15 Min 15 Min 15 Min 15Min 15 Min 15 Min 15 Min Change in Reading (RF -RI): Pass/Fail Threshold or Criteria: -0.0020 -0.0020 -0.0020 -0.0020 -0.0020 -0.0020 -0.0020 -0.0020 Test Result: 04ass, ❑Fail [s]—Pass; DF 'I ❑ Pass ;' ❑ Fail ❑ Pass,'i ❑ Fail Is there a sensor in the sump? ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Does sensor alarm when either product or water is detected? ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA Was sensor removed for Testing? 10 Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ®Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA comments — on repairs made prior to testing, and Mevron # 208117 755 S Tracy Blvd Cracy, Ca 18128 SB989