COMPLIANCE INFO_2014-2017 - Laserfiche WebLink

Home Browse Search

6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑✓ Industry Standard ❑Professional Engineer [-]Other(Spec) Test Method Used: ❑Pressure ❑Vacuum ❑✓ Hydrostatic E]Other(Spec) Test Equipment Used: See attached testing procedures Equipment Resolution: Inches ENNOME Sump# 87 Sump# 91 Sump# Sump# Sump Diameter: 48" 48" Sump Depth: 78" 78" Sump Material: Fiberglass Fiberglass Height from Tank Top to flop of 12" 12" Highest Piping Penetration: Height from Tank Top to Lowest 25" 27" Electrical Penetration: Condition of sump prior to testing: Fair Fair Fair Fair Portion of Sump Tested' Above highest penetration Above highest penetration Above highest penetration Above highest penetration Does turbine shut down when sump sensor detects liquid(both ❑Yes []No ❑✓NA ❑Yes []No ❑✓NA ❑Yes[] No M NA ❑Yes ❑(vo ✓❑NA product and water)?* Turbine shutdown response time N/A N/A I N/A N/A Is system programmed for fail-safe ❑ ❑ []Yes ❑No ❑ ElYes❑ No[Z]NA [:1 Yes []NoR✓NA shutdown?` ❑Yes No NA NA Was fail-safe verified to be o erational?' []Yes ❑No ❑✓NA [:]Yes ❑No ✓❑NA [-]Yes ❑No ❑✓NA [1 Yes [:]No �✓NA Wait time between applying pressure/vacuum/water and starting 15 minutes 15 minutes 15 minutes 15 minutes test: Test Start Time: 10:54am 10:53am Initial Reading(RI): 4.18182 Inches 0.98256 Inches Inches Inches Test End Time: 11:09am 11:08am Final Reading(RF): 4.18163 Inches 0.98259 Inches Inches Inches Test Duration: 15 mins 15 mins 15 mins 15 mins Change in Reading(RF-R,): 0.00019 0.00003 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: ❑✓ Pass ❑Fail ❑✓ Pass ❑Fail ❑Pass ❑Fail ❑Pass ❑Fail Was sensor removed for testing? Oyes ❑No [INA Eyes ❑No [INA ❑✓ Yes ❑No ❑NA ❑✓ Yes ❑No ❑NA Was sensor properly replaced and ❑✓Yes ❑No []NA ❑✓ Yes E]No ❑NA ✓❑Yes []No ❑NA ❑✓ Yes []No []NA verified functional after testing? Comments—(include information on repairs made prior to testing,and recommended follow-up for failed tests)