Laserfiche WebLink
Installation Wiring the Conduit Box <br />X1051-301-2.eps rG) <br />0 -ring <br />c� Ground wire screw <br />1 <br />I Ground wire <br />Cup washer terminal <br />External toothed washer <br />Power and thermal overload <br />leads to pump <br />NOTE: for European installations, the --- <br />End User must use an ATEX EEX d 116 <br />certified cable gland or stopping box. <br />(V Conduit) <br />Conduit from control box <br />Figure 2. Conduit Box - Yoke Assembly <br />WARNING! Disconnect, lock out, and tag power at the panel before starting to service the pump. <br />When servicing equipment, use non -sparking tools and use caution when removing or installing <br />equipment to avoid generating a spark. <br />1. Connect the electrical conduit through the approved fittings to the conduit box. <br />2. Remove the conduit box cover. <br />3. Connect the wires from the power supply to the wires in the conduit box. <br />4. Install the gound wire from the power panel. <br />5. Sparingly lubricate the o -ring before screwing the cover into the manifold, Use light grease, oil, or petroleum <br />jelly. Replace the conduit box coven Do not use pipe sealant On the conduit box cover's threads. Tqrque to 35 <br />ft -Ib (50 N -m). <br />0 <br />7 <br />0 <br />1 <br />