Laserfiche WebLink
Installation Starting the System and Completing the Installation <br />Table B. <br />Bury <br />Depth <br />"A" <br />Riser Length <br />"B" <br />Tank Diameters "C" / Pump Length Requirements "D" <br />30" <br />10" (883-442-1) <br />C = 72" 10 = 78" <br />C -84'/D=90" <br />C=96"/D=102" <br />C=120"10=126' <br />C=144"/D=150" <br />36" <br />16" (883.445-1) <br />C=72"/D=84" <br />C=84'/D=96" <br />C=96"/D=108" <br />C=120"/D=132" <br />C=144"/D=156" <br />42" <br />21" (883-449-1) <br />C- 72"/ D =89" <br />C= 84"/ D= 101 " <br />C= 96"/ D = 113" <br />C =120" / D =137" <br />C= 144" / D = 161 " <br />48" <br />27" (883-449.1) <br />C- 72" 1 D = 95' <br />C = 84"1 D =107" <br />C=96'/D=119" <br />C=120"/D=143" <br />C=14 "/D=167" <br />60" <br />36' (883.451-1) <br />C = 72'/ D = 104" <br />C = 84"/ D = 116" <br />C = 96" 1 D = 128" <br />C =120" 1 D = 152" <br />C = 144" / D = 176" <br />72" <br />51"(883-454-1) <br />C=72'/D=119" <br />C=84"/D=131" <br />C=96"/D=143" <br />C=120"/D=167" <br />C=144"/D=191" <br />Table C. <br />Model Number <br />Pump Motor <br />Assembly <br />HP <br />volt <br />Phase <br />Winding Resistances (Ohms) <br />Orange to Red <br />Orange to <br />Black <br />Red to Black <br />Blue to Blue <br />UMP200J1-2MB <br />2 <br />208-230 <br />1 <br />5.4-6.2 <br />1.5.2.0 <br />6.9.8.2 <br />0.0-1.0 <br />UMP200J4-2MB <br />2 <br />208.230 <br />3 <br />2.3-3.2 <br />2.3-3.2 <br />2.3 - 3.2 <br />0.0 - 1.0 <br />UMP300J4.2HB <br />3 <br />208-230 <br />3 <br />1.7 - 2.3 <br />1.7-2.3 <br />1.7 - 2.3 <br />0.0 1.0 <br />UMP300J17-3HB <br />3 <br />380-415 <br />3 <br />7.5-9.1 <br />7.5-9.1 <br />7.5 - 9.1 <br />0.0 - 1.0 <br />UMP500J4.2K <br />5 <br />208-230 <br />3 <br />1.0 - 1.1 <br />1.0 - 1.1 <br />1.0 - 1.1 <br />0.0 - 1.0 <br />U MP500J 17-3K <br />5 <br />380-415 <br />3 <br />3.6-4.4 <br />3.6-4.4 <br />3.6-4.4 <br />0.0-1.0 <br />UM P50016.2K <br />5 <br />575 <br />3 <br />5.8-70 <br />5.8-7.0 <br />5.8-70 <br />0.0-1.0 <br />NOTE: The above readings do not include the added resistance of the power supply wires to the submersible pump. Therefore, for <br />the readings to fall within the above limits, the resistance should be checked at the submersible pump junction box. If the resis- <br />tance readings are taken at the control box or magnetic starter, they will be sightly higher. <br />WARMING? Disconnect, lock out, and tag power at the panel before servicing the pump and <br />.:. e - taking these resistance readings. <br />When servicing equipment, use non -sparking tools and use caution when removing or <br />installing equipment to avoid generating a spark. <br />n <br />17 <br />a <br />