COMPLIANCE INFO_2013-2016 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 7. UNDER-DISPENSER CONTAINMENT UDC TESTING Test Method Developed By: ❑UDC Manufacturer iX Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum 9 Hydrostatic ❑Other(Spec) Test Equipment Used: Incon Incon TS-STS Tester Equipment Resolution: +/-0.002" UDC# 16-17 UDC# 18 UDC# UDC# UDC Manufacturer: Unknown Unknown UDC Material: Fiber lass Fiberglass UDC Depth: 31" 31" Height from UDC Bottom to Top 12" 13" of Highest Piping Penetration: Height from UDC Bottom to 4" 4" Lowest Electrical Penetration: Condition of UDC prior to Good Good testing: Portion of UDC Tested 17" 18" Does turbine shut down when UDC sensor detects liquid(both ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?* Turbine shutdown response time Is system programmed for fail- ❑Yes []No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA safe shutdown?* Was fail-safe verified to be ❑Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA operational?* Wait time between applying pressure/vacuum/water and 15 minutes 15 minutes starting test Test Start Time: 11:39am 11:55am 11:39am 11:55am Initial Reading (RI): 1.0979" 1.0984" 3.9987" 3.9973" Test End Time: 11:54am 12:10 m 11:54am 12:10 m Final Reading RF): 1.0983" 1.0984" 3.9981" 3.9975" Test Duration: 115 Minutes Each 30 15 Minutes Each 30 Change in Reading RF-R,): 10.0004 1 0.0000 -0.0006 0.0002 Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002 +/-0.002" +/-0.002 Test Result: 9 Pass ❑Fail 9 Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? ®Yes []No ❑NA ®Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and id Yes []No ❑NA L Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testin ? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) 'If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)