Laserfiche WebLink
AML <br />DISPENSER MOUNTING <br />SPECIFICATIONSINGLE WALL <br />Summary <br />The Dispenser Mounting Assembly Containment System is installed in conjunction with the product dispenser <br />and in accordance with the manufacturer's installation instructions. The Dispenser Mounting/Containment <br />System shall contain environmentally hazardous fluids that might leak from any piping terminations, fittings, and <br />flex -hoses contained within the Dispenser Mounting/Containment Assembly, shall insure, using U.L. Listed <br />mounting systems for both dispenser base and safety valves, that safety valve poppet activation occurs in the <br />event of dispenser knock -down without damage to either mount frame system and shall be manufactured by <br />Western Fiberglass, Inc. <br />System Specification <br />1.01 System Suitability <br />The Dispenser Mounting Containment System shall: <br />A. Provide secure, independent, U.L. Listed mounting assemblies for both the dispenser base <br />and shear valve that shall be anchored in concrete for transfer of stress and loading. Such <br />that shearing action occurs at the shear valve upon dispenser impact without damage to <br />the mounting frameworks. <br />B. Provide a means to prevent surface, ground, run-off or wash -down water from entering the <br />containment system. <br />C. Contain any release of environmental contaminants from the dispenser and/or fittings <br />contained within the Dispenser Mounting/Containment System. <br />D. Provide full access to all piping terminations, fittings and hoses contained within the <br />Dispenser Mounting/Containment System. <br />E. Accommodate an explosion/flame suppressant barrier to prevent flash fire. <br />F. Be available U. L. Listed in FRP construction. <br />1.02 Construction Specifications: <br />A. Meet or exceed United States National Bureau of Standards PS -15-69 for Custom Contact - <br />Molded Reinforced -Polyester Chemical -Resistant Process Equipment or U.L. Listing if <br />applicable. <br />B. Be constructed of materials that are not harmful to the environment. <br />C. Be suitable for petroleum products and blends including methanol and ethyl alcohol <br />mixtures. <br />E. Have a thirty (30) year warranty against corrosion. <br />1.03 Release Monitoring shall: <br />A. Allow full visual inspection of all piping reductions, fittings, and hoses. <br />1.04 Piping Penetrations shall: <br />A. Provide locations for the installation of fluid tight pipe and conduit penetration seals to be <br />installed according to manufacturer's instructions. <br />Contact • More Information! <br />1555 Copperhill Parkway • Santa Rosa, CA 95403 <br />Ph: (800) 688-3375 or (707) 523-2050 <br />www.westernfg.com <br />