|
PLUMBING PLUMBING 'All
<br /> SECTION 221316-SANITARY WASTE AND VENT PIPING SECTION 221319-SANITARY WASTE PIPING SPECIALTIES
<br /> 1.1 PROJECT CONDITIONS 1.1 ACTION SUBMITTALS �•
<br /> A. INTERRUPTION OF EXISTING SANITARY WASTE SERVICE: DO NOT INTERRUPT A. PRODUCT DATA: FOR EACH TYPE OF PRODUCT INDICATED. INCLUDE RATED
<br /> SERVICE TO FACILITIES OCCUPIED BY OWNER OR OTHERS UNLESS PERMITTED CAPACITIES, OPERATING CHARACTERISTICS,AND ACCESSORIES FOR THE
<br /> UNDER THE FOLLOWING CONDITIONS AND THEN ONLY AFTER ARRANGING TO FOLLOWING:
<br /> PROVIDE TEMPORARY SERVICE ACCORDING TO REQUIREMENTS INDICATED: 1. FOG DISPOSAL SYSTEMS.
<br /> 1. NOTIFY CONSTRUCTION MANAGER NO FEWER THAN TWO DAYS IN ADVANCE OF 2. GREASE INTERCEPTORS.
<br /> PROPOSED INTERRUPTION OF SANITARY WASTE SERVICE. 3. GREASE REMOVAL DEVICES.
<br /> 2. DO NOT PROCEED WITH INTERRUPTION OF SANITARY WASTE SERVICE WITHOUT 4. WIRING DIAGRAMS: POWER, SIGNAL,AND CONTROL WIRING.
<br /> CONSTRUCTION MANAGER'S WRITTEN PERMISSION.
<br /> 1.2 QUALITY ASSURANCE ©2020 STARBUCKS COFFEE COMPANY
<br /> 1.2 MATERIALS A. QUALITY STANDARD FOR BELOW GRADE PLASTIC PIPING: NSF 14.
<br /> A. HUB-AND-SPIGOT, SERVICE-CLASS, CAST-IRON SOIL PIPE AND FITTINGS BELOW STA R B V C KS°
<br /> GRADE WHERE REQUIRED BY LOCAL CODE. 1.3 PRODUCTS
<br /> B. HUBLESS, CAST-IRON SOIL PIPE AND CISPI, CAST-IRON OR HUBLESS PIPING A. BACKWATER VALVES: HORIZONTAL-CAST IRON, DRAIN OUTLET OR HORIZONTAL-
<br /> COUPLINGS. PLASTIC 2401 UTAH AVENUE SOUTH
<br /> C. SOLID-WALL ORCELLULAR-CORE SCHEDULE 40 ABS PIPE WITH ABS SOCKET B. CLEANOUTS: SEATTLE, WASHINGTON 98134
<br /> FITTINGS MAY BE USED ABOVE AND BELOW GRADE IF ALLOWED BY LOCAL CODE. 1. EXPOSED: COUNTERSUNK, COUNTERSUNK OR RAISED-HEAD, RAISED-HEAD, (206) 318-1575
<br /> D. SHIELDED, NONPRESSURE OR PRESSURE BRASS,CAST-IRON OR PLASTIC CLOSURE PLUG.
<br /> TRANSITION COUPLINGS. 2. CERAMIC TILE AND CARPETED FLOORS: SQUARE,ADJUSTABLE WITH NICKEL
<br /> E. UNION, FLANGE, FLANGE INSULATING KIT OR NIPPLE DIELECTRIC FITTINGS. BRONZE TOP. THESE DRAWINGS AND THE PROJECT MANUAL
<br /> F. PE-FILM ENCASEMENT FOR UNDERGROUND METAL PIPING. 3. RESILIENT(VINYL)FLOOR: SQUARE,ADJUSTABLE, NICKEL BRONZE TOP WITH ARE CONFIDENTIAL AND SHALL REMAIN THE
<br /> G. SCHEDULE 40 PVC PIPE WITH PVC SOCKET FITTING MAY BE USED BELOW GRADE COMPATIBLE FLANGE. SOLE PROPERTY OF STARBUCKS
<br /> IF ALLOWED BY LOCAL AUTHORITY. 4. WALL: ROUND, DEEP-CHROME-PLATED BRONZE,FLAT, CHROME-PLATED CORPORATION, WHICH IS THE OWNER OF THE
<br /> BRASS OR STAINLESS-STEEL COVER PLATE WITH ROUND, CHROME PLATED, COPYRIGHT IN THIS WORK. THEY SHALL NOT
<br /> 1.3 ADHESIVES SCREW WALL ACCESS. BE REPRODUCED(IN WHOLE OR IN PART),
<br /> A. ADHESIVES SHALL NOT EXCEED A VOC CONTENT OF 51OG/L FOR PVC AND 325 C. FLOOR DRAINS: SHARED WITH THIRD PARTIES OR USED IN ANY
<br /> G/L FOR ABS. 1. CAST-IRON FLOOR DRAINS, WITH STRAINER, BODY STYLE AND OPTIONS AS MANNER ON OTHER PROJECTS OR
<br /> SPECIFIED IN PLUMBING SCHEDULE. EXTENSIONS TO THIS PROJECT WITHOUT THE
<br /> END OF SECTION 221316 2. PROVIDE TRAP PRIMER CONNECTIONS WHERE NEEDED PER CODE AND DESIGN PRIOR WRITTEN CONSENT OF STARBUCKS
<br /> REQUIREMENTS. CORPORATION. THESE DRAWINGS AND
<br /> D. TRENCH DRAINS TO BE AS SPECIFIED IN PLUMBING SCHEDULE. SPECIFICATIONS ARE INTENDED TO EXPRESS
<br /> E. THROUGH-PENETRATION FIRESTOP ASSEMBLIES: LISTED AND LABELED ASSEMBLY DESIGN INTENT FOR A PROTOTYPICAL
<br /> OF SLEEVE AND STACK FITTING WITH FIRESTOPPING PLUG;WITH SPECIAL STARBUCKS STORE (WHICH IS SUBJECT TO
<br /> CORROSION-RESISTANT COATING ON INTERIOR OF FITTINGS. CHANGE AT ANYTIME)AND DO NOT REFLECT
<br /> F. MISCELLANEOUS SANITARY DRAINAGE PIPING SPECIALTIES: ACTUAL SITE CONDITIONS. NEITHER PARTY
<br /> 1. OPEN DRAINS, SHOP OR FIELD FABRICATE FROM SERVICE CLASS, SHALL HAVE ANY OBLIGATION NOR LIABILITY TO
<br /> HUB-AND-SPIGOT, CAST-IRON, SOIL-PIPE FITTINGS. THE OTHER(EXCEPT STATED ABOVE)UNTIL A
<br /> 2. CAST-IRON OR BRONZE DEEP-SEAL TRAPS.
<br /> 3. FLOOR-DRAIN,TRAP-SEAL PRIMER FITTINGS. WRITTEN AGREEMENT IS FULLY EXECUTED BY
<br /> 4. AIR-GAP FITTINGS. BOTH PARTIES.
<br /> 5. COUNTERFLASHING-TYPE, CAST-IRON STACK FLASHING FITTINGS.
<br /> 6. CAST-IRON BODY VENT CAPS. STARBUCKS TEMPLATE VERSION: i2020.10.23
<br /> 7. FROST-RESISTANT VENT TERMINALS.
<br /> 8. EXPANSION JOINTS.
<br /> 1.4 MANUFACTURED UNITS architecture
<br /> A. FOG DISPOSAL SYSTEMS AS SPECIFIED IN PLUMBING SCHEDULE. interiorsand
<br /> B. GREASE INTERCEPTORS AS SPECIFIED IN PLUMBING SCHEDULE.
<br /> C. GREASE REMOVAL DEVICES AS SPECIFIED IN PLUMBING SCHEDULE.
<br /> D. SOLIDS INTERCEPTORS: FACTORY-FABRICATED INTERCEPTOR MADE FOR
<br /> REMOVING AND RETAINING LINT OR SEDIMENT FROM 5858 Wilshire Blvd #200 T: 323.954.8996
<br /> WASTEWATER AS SPECIFIED IN PLUMBING SCHEDULE.
<br /> Los Angeles, CA 90036 F: 323.954.8965
<br /> END OF SECTION 221319 www.valerioinc.com * info@valerioinc.com
<br /> PLUMBING ;OQRpFESSipN••.
<br /> ACTES q
<br /> SECTION 223000-DOMESTIC-WATER HEATERS :'4��OSPN G RF�yFye
<br /> z:
<br /> 1.1 QUALITY ASSURANCE ENGINEERING '
<br /> 0.
<br /> A. PERFORMANCE EFFICIENCY:ASHRAE/IESNA 90.1 AND ASHRAE 90.2. 400 N McCarthy Blvd. E
<br /> B. ASME COMPLIANCE:ASME BOILER AND PRESSURE VESSEL CODE: SECTION VIII, Suite 250,Milpitas,CA 95035
<br /> DIVISION 1. ph:(408)522-5255 •':r/4�FCHAN\GP���?;•
<br /> C. NSF COMPLIANCE: NSF 61 ANNEX G, "DRINKING WATER SYSTEM COMPONENTS- fx:(a0s)522-52so •'••.f�F CA \1
<br /> HEALTH EFFECTS." info@acies.net ••••••
<br /> Copyright©2021
<br /> 1.2 COMMERCIAL, ELECTRIC, DOMESTIC-WATER HEATERS
<br /> A. COMMERCIAL, LIGHT-DUTY, STORAGE, ELECTRIC, DOMESTIC-WATER HEATERS:
<br /> STEEL, GLASS LINED,VERTICAL ARRANGEMENT WITH 150-PSIG(1035-KPA)
<br /> PRESSURE RATING.
<br /> B. SEE PLUMBING SCHEDULE FOR MAKE, MODEL, CAPACITY, AND RECOVERY RATE.
<br /> 1.3 COMMERCIAL, GAS-FIRED, STORAGE, DOMESTIC-WATER HEATERS
<br /> A. COMMERCIAL,ATMOSPHERIC], POWER-BURNER OR POWER-VENT, GAS-FIRED,
<br /> STORAGE, DOMESTIC-WATER HEATERS: STEEL, GLASS LINED, VERTICAL
<br /> ARRANGEMENT WITH 150-PSIG(1035-KPA)PRESSURE RATING CONDENSING TYPE.
<br /> MINIMUM EFFICIENCY 90%. MEETS LOW NOx EMMISIONS PER CODE
<br /> REQUIREMENTS.
<br /> 1.4 DOMESTIC-WATER HEATER ACCESSORIES
<br /> A. DRAIN PANS: CORROSION-RESISTANT METAL WITH RAISED EDGE.
<br /> B. PIPING-TYPE HEAT TRAPS. Q
<br /> C. HEAT-TRAP FITTINGS. LO
<br /> D. GAS SHUTOFF VALVES. I r z
<br /> E. GAS PRESSURE REGULATORS: PRESSURE RATING TO MATCH GAS SUPPLY
<br /> F. AUTOMATIC GAS VALVES. � O
<br /> G 06 .PRESSURE-REDUCING VALVES.
<br /> H. COMBINATION TEMPERATURE-AND-PRESSURE RELIEF VALVES. Q U
<br /> L PRESSURE RELIEF VALVES. W U
<br /> J. VACUUM RELIEF VALVES. ZJ
<br /> K. SHOCK ABSORBERS. -
<br /> L. DOMESTIC-WATER HEATER STANDS. LU - Z
<br /> M. DOMESTIC-WATER HEATER MOUNTING BRACKETS. LU 2 Z
<br /> N. EXPANSION TANK Q 0
<br /> 1.5 ALL COMPONENTS OF DOMESTIC WATER SYSTEM TOUCHING DOMESTIC WATER ARE z Q O
<br /> LEAD FREE, INCLUDING ALL VALVES AND FITTINGS. F- = W N U
<br /> END OF SECTION 2230000
<br /> O 0 z
<br /> CD
<br /> W w
<br /> 007U)
<br /> STORE #: 9287
<br /> PROJECT #: 23544-077
<br /> ISSUE DATE: 03/12/2021
<br /> SR. DESIGN MANAGER: JESSICA RAMOS
<br /> DESIGN MANAGER:
<br /> CHECKED BY:
<br /> Revision Schedule
<br /> Rev Date By Description
<br /> 03/12/21 ACIES PERMIT SET
<br /> SHEET TITLE:
<br /> PLUMBING OUTLINE
<br /> SPECIFICATIONS
<br /> SCALE: N.T.S.
<br /> SHEET NUMBER:
<br /> P-0003
<br />
|