Laserfiche WebLink
Schmolz+Bickenbach USA/CANADA Stainless Steel SDS <br /> Class D extinguishing agents on fines,dust or molten metal.Use coarse water spray on chips and fines. <br /> Unsuitable Extinguishing Media <br /> DO NOT use halogenated extinguishing agents on small chips or fines.DO NOT use water for fires involving molten metal. <br /> These fire extinguishing agents will react with burning material. <br /> Fire Fighting Equipment/Instructions <br /> As in any fire,wear self-contained breathing apparatus pressure-demand,MSHA/NIOSH(approved or equivalent)and full <br /> protective gear. <br /> ** * Section 6 -Accidental Release Measures <br /> Recovery and Neutralization <br /> Avoid dust formation.Collect scrap for recycling. <br /> Materials and Methods for Clean-Up <br /> If product is molten,contain the flow using dry sand or salt flux as a dam.All tools and containers which come in contact with <br /> molten metal must be preheated or specially coated and rust free.Allow the spill to cool before remelting as scrap. Emergency <br /> Measures <br /> Keep people away from and upwind of spill/leak. <br /> Personal Precautions and Protective Equipment <br /> Wear appropriate protective clothing and respiratory protection for the situation. <br /> Environmental Precautions <br /> Prevent further leakage or spillage if safe to do so.Prevent product from entering drains. Do not flush into surface water or <br /> sanitary sewer system. <br /> Prevention of Secondary Hazards <br /> None <br /> * * * Section 7 - Handling and Storage <br /> Handling Procedures <br /> Avoid contact with skin,eyes and clothing.Wear personal protective equipment.Avoid dust formation.Keep material dry.Avoid <br /> contact with sharp edges or heated material.Hot and cold aluminum are not visually different.Hot aluminum does not always <br /> glow red. <br /> Storage Procedures <br /> Keep container tightly closed in a dry and well-ventilated place. <br /> Incompatibilities <br /> Acids.Alkalis.Water.Halogenated compounds.Metal oxides.Iron powder and water:may cause an explosive reaction forming <br /> hydrogen gas when heated above 1470F(800C). <br /> Page 4 of 12 Schmolz+Bickenbach USA/CANADA Stainless Steel SDS 04/01/2019 <br />