Laserfiche WebLink
Tank Certification <br /> LKQ, Inc. Tanlc# 2 -Used Oil <br /> Containment#2 <br /> (d) Describe procedures to test for tightness and results of test: <br /> Observed a hill tank over 24 hour period and measured the liquid level at the beginning_ <br /> and end of that period No leaks observed. <br /> s <br /> Note: If applicable, long piping runs (Greater then 10 ft) were pressure tested and the <br /> results are shown elsewhere. <br /> (e) Is ancillary equipment supported and protected against physical damage and excessive stress <br /> due to settlement, vibration, expansion, or contraction? Describe supports and protective <br /> measures: <br /> No ancillary equipment <br /> (f) Describe corrosion protection in place. Is it adequate: <br /> I1nit is painted. <br /> (k)(1) Tank configuration(horizontal or Vertical): Horizontal <br /> Material of construction: Steel <br /> Gross capacity (gallons) 275 gal. <br /> (k)(2)(A) Material of construction Steel <br /> (k)(2)(B) Material thickness 1/8" <br /> Method used to determine thickness: Direct measurement <br /> (k)(2)(C)Description of tank system piping <br /> Inlet Piping: <br /> None <br /> Outlet Piping: <br /> None <br /> (k)(2)(D) Description of any internal and external pumps: <br /> None <br /> LKQ,Inc. Tank#2-Used Oil Page 3 <br /> Chemical Data Management Systems-Tank Certification- 12/17/2018 <br />