Laserfiche WebLink
MAXIM <br /> CATALYTIC EXHAUST SILENCERS <br /> ® Using proven and economical rare metal pellet technology <br /> • An economical solution to emission regulations <br /> -- The Maxim Advantage — <br /> NOx —Typical expected reductions are 90%+. <br /> CO — Model MCSR will reduce 50 to 80% of the CO, depending on A/F ratio, while eliminating over <br /> 90%of the NOx.Maxim MCSO will remove almost all the CO on oxidizing applications. <br /> EXCELLENT SILENCING — Unlike honeycomb substrate which gives little or no silencing, Maxim <br /> catalytic silencers provide semi-residential noise control comparable to our M31. When used in <br /> conjunction with our MFT or TRP exhaust heat recovery units, hospital critical silencing is <br /> achieved with no auxiliary silencers. <br /> LONG LIFE— Primary factors which limit life are catalyst poisons(sulfur, phosphorus and silicon). Effect. <br /> of poisons on catalyst life is independent of substrate form. <br /> ECONOMICAL — All catalytic units require periodic recharge. Servicing the MAXIM catalytic silencer is <br /> quick,easy, comparatively inexpensive and requires no dismantling of the exhaust system. <br /> Quick and Easy - Let the catalytic silencer cool down and open the evacuation ports on the <br /> bottom of the unit. Remove the old pellets. Replace the ports and pour fresh catalyst into the <br /> renewal ports on top of the unit.There is no need to disassemble or remove the unit or to handle <br /> fragile and expensive honeycomb catalyst assemblies. <br /> INEXPENSIVE — The Maxim supplied catalyst pellets are considerably less expensive than monolith <br /> honeycomb catalysts. Cost to recharge our catalytic silencer is approximately 50% of total <br /> package. On competitive units, the cost of the recharge can cost as much as 100% of the <br /> original cost. Inexpensive because substrate and catalyst are already being mass produced for <br /> use in automobile,chemical, petrochemical,and pharmaceutical industries. <br /> MODEL MCSR — <br /> Reduce NOx and CO from natural gas engines with a stoichiometric exhaust mixture. Materials <br /> of construction are corrosion resistant. Includes high temperature shutdown monitor. <br /> MODEL MCSO — <br /> Reduce CO and HC in exhaust streams with excess oxygen. Corrosion resistant materials of <br /> construction.Optional high temperature shutdown monitor. <br /> C/14 <br />