Laserfiche WebLink
DATA QUALIFIERS <br /> B - Indicates the compound was found in the blank and the sample. <br /> E - Concentrations exceed calibration range of the instrument. <br /> I - Indicates Interference. <br /> J - Indicates an estimated value for either a TIC or an analyte that meets the <br /> identification criteria but the result is less than the specified reporting limit. <br /> T - Indicates the compound was found in the TCLP extraction blank and the sample. <br /> U - Indicates an inorganic compound was analyzed for but not detected. <br /> U - Indicates an organic compound was analyzed for but not detected. <br /> BS - Indicates matrix analyses were conducted on reagent grade water. <br /> BSD- Blank Spike Duplicate <br /> BDL- Below Detection Limit <br /> D - Indicates that surrogate/matrix spike recoveries were not obtained because the <br /> extract had to be diluted for analysis. <br /> DL - Indicates a secondary dilution <br /> DF - Dilution factor <br /> LCS- Laboratory Control Sample <br /> MB - Method Blank <br /> MS - Matrix Spike <br /> MSD- Matrix Spike Duplicate <br /> NA - Not Applicable <br /> X - Result is by calculation <br /> NS - Not Spiked 'Result was outside advisory limits. <br />