Laserfiche WebLink
Enseco <br />A CORNING C -PI, <br />I Sample Description <br />See the attached Sample Description Information. <br />The samples were received under chain -of -custody. <br />II Analysis Request <br />The following analytical test was requested. <br />Lab ID Analysis Description <br />052240-1,2 General Minerals <br />III Quality Control <br />A. Project Specific QC. No project specific QC (i.e., spikes and/or <br />duplicates) was requested. <br />B. Method Blank Results. A method blank is a laboratory -generated <br />sample which assesses the degree to which laboratory operations <br />and procedures cause false -positive analytical results for your <br />samples. <br />No target parameters were detected in the method blanks associated <br />with your samples at the reporting limit levels noted on the <br />attached Method Blank Report. 9 <br />C. Laboratory Control Samples - The LCS Program <br />Duplicate Control Samples. A DCS is a well -characterized matrix <br />(blank water, sand or celite) which is spiked with certain target <br />parameters and analyzed at approximately 10% of the sample load in <br />order to establish method -specific control limits. The DCS <br />results associated with your samples are on the attached Duplicate <br />Control Sample Report. <br />Single Control Samples. An SCS consists of a control matrix that <br />is spiked with surrogate compounds appropriate to the method being <br />used. In cases where no surrogate is available, (e.g. metals or <br />conventional analyses) a single control sample identical to the <br />DCS serves as the control sample. An SCS is prepared for each <br />sample lot. Accuracy is calculated identically to the DCS. The <br />SCS results associated with your samples are on the attached <br />Single Control Sample Report. <br />11 <br />