Laserfiche WebLink
Enseco <br />A CORNING Company <br />I Sample Description <br />See the attached Sample Description Information. <br />The samples were received under chain -of -custody. <br />II Analysis Request <br />The following analytical tests were requested. <br />Lab ID Analysis Description <br />052262-1,2 Halogenated Volatile Organics <br />Aromatic Volatile Organics <br />2,3 General Minerals <br />Hexavalent Chromium <br />Nitrate <br />Sulfide <br />Total Organic Carbon <br />Selected Metals <br />III Quality Control <br />A. Project Specific QC. No project specific QC (i.e., spikes and/or <br />duplicates) was requested. <br />B. Method Blank Results. A method blank is a laboratory -generated <br />sample which assesses the degree to which laboratory operations <br />and procedures cause false -positive analytical results for your <br />samples. <br />No target parameters were detected in the method blanks associated <br />with your samples at the reporting limit levels noted on the <br />attached Method Blank Report. <br />Repetitions of method blanks (with identical QC Lot No.s and Run <br />No.$) have been reported but do not indicate unique <br />determinations. In the future these will not be reported. <br />C. Laboratory Control Samples - The LCS Program <br />Duplicate Control Samples. A DCS is a well -characterized matrix <br />(blank water, sand or celite) which is spiked with certain target <br />parameters and analyzed at approximately 10% of the sample load in <br />order to establish method -specific control limits. The DCS <br />results associated with your samples are on the attached Duplicate <br />Control Sample Report. <br />U <br />