Laserfiche WebLink
WASTE DISCHARGE REQUIREMENTSORDER NO. R5-2003-0020 -17- <br />FOR COUNTY OF SAN JOAQUIN <br />FOR CONSTRUCTION, OPERATION, CLOSURE AND EVALUATION MONITORING <br />FOOTHILL SANITARY LANDFILL, MUNICIPAL SANITARY LANDFILL <br />SAN JOAQUIN COUNTY <br />detection limit of the analytical method used (i.e., US -EPA methods 8260 and 8270), but <br />not less than 0.1 parts per billion (ppb). The repeated detection of one or more non - <br />naturally occurring organic compounds in samples above the Water Quality Protection <br />Standard from detection monitoring wells is evidence of a release from the Unit. <br />6. The concentrations of the constituents of concern in waters passing the Point of <br />Compliance shall not exceed the concentration limits established pursuant to Monitoring <br />and Reporting Program No. R5-2003-0020. <br />7. For each monitoring event, the Discharger shall determine whether the landfill is in <br />compliance with the Water Quality Protection Standard using procedures specified in <br />Monitoring and Reporting Program No. R5-2003-0020 and §20415(e) of Title 27. <br />8. For any given monitored medium, the samples taken from all monitoring points and <br />background monitoring points to satisfy the data analysis requirements for a given <br />reporting period shallall be taken within a span not to exceed 30 days, unless the <br />Executive Officer approves a longer time period, and shall be taken in a manner that <br />ensures sample independence to the greatest extent feasible. Specific methods of <br />collection and analysis must be identified. Sample collection, storage, and analysis shall be <br />performed according to the most recent version of USEPA Methods, such as the latest <br />editions, as applicable, of: (1) Methods for the Analysis of Organics in Water and <br />Wastewater (USEPA 600 Series), (2) Test Methods for Evaluating Solid Waste (SW -846, <br />latest edition), and (3) Methods for Chemical Analysis of Water and Wastes (USEPA <br />600/4-79-020), and in accordance with the approved Sample Collection and Analysis Plan. <br />9. If methods other than USEPA-approved methods or Standard Methods are used, the exact <br />methodology shall be submitted for review and approval by the Executive Officer prior to <br />use. <br />10. The methods of analysis and the detection limits used must be appropriate for the expected <br />concentrations. For the monitoring of any constituent or parameter that is found in <br />concentrations which produce more than 90% non -numerical determinations (i.e., "trace" <br />or "ND") in data from background monitoring points for that medium, the analytical <br />method having the lowest method detection limit (MDL) shall be selected from among <br />those methods which would provide valid results in light of any matrix effects or <br />interferences. <br />11. "Trace" results - results falling between the MDL and the practical quantitation limit <br />(PQL) - shall be reported as such, and shall be accompanied by both the estimated MDL <br />and PQL values for that analytical run. <br />12. MDLs and PQLs shall be derived by the laboratory for each analytical procedure, according <br />to State of California laboratory accreditation procedures. These MDLs and PQLs shall <br />reflect the detection and quantitation capabilities of the specific analytical procedure and <br />