Laserfiche WebLink
BENTONITE <br /> CERTIFICATE OF ANALYSIS <br /> CETCO <br /> 92 HWY. 37 <br /> LOVELL, WY 82431 <br /> TO: GSE Lining Technology,Inc. DATE: 6/21/99 <br /> ATTN: Mr.Dale Geary, <br /> Dear Customer: <br /> The BENTONITE that is used to produce our GCL is CG 50 from CETCO, Order Number See Below <br /> A sample of the CG 50 was tested from Lot Number 062199C and was provided the <br /> following test results below. <br /> ROLL # Daily Results <br /> TEST METHOD REQ.SPECIFICATION ACTUAL RESULTS <br /> RET. 10 MESH ASTM C 136 0 PERCENT 0 <br /> Free Swell ASTM D 5890 24 MLS./2g MIN. 26.0 <br /> Fluid Loss ASTM D 5891 18.0 MLS( MAX) 15.6 <br /> Moisture ASTM D 2216 12.0%(MAX) 7.6 <br /> Passing 200 Mesh ASTM D 421 1 % (Max) 0.3 <br /> We hereby certify that the results shown above represent this shipment. Tests were conducted <br /> using American Standard Test Methods and/or customer approved laboratory procedures. <br /> Product made in the U.S.A. <br /> Tests Conducted By: RP, SF,MG. <br /> Approved By: Noe Garcia <br /> In any correspondence regarding this shipment,please refer to our Order Numbers listed below. <br /> 110049 <br />