Laserfiche WebLink
F. The Geocomposite shall conform to the physical property requirements in Table <br /> 02774-1. The GEOSYNTHETICS CONTRACTOR shall provide the QA/QC <br /> CONSULTANT with control test results for the properties listed in the following <br /> table at a minimum frequency of 1 test per 100,000 square feet of material,except for <br /> apparent opening size, permittivity, wide width tensile, and transmissivity testing <br /> which shall be performed at a frequency of 1 test every 600,000 square feet. <br /> PROPERTIES TEST PROCEDURE <br /> Geonet Component Specific gravity ASTM D 792 <br /> Thickness ASTM D 5199 <br /> Carbon black ASTM D 1603 <br /> Geotextile Component Mass per unit area ASTM D 5261 <br /> Apparent opening size ASTM D 4751 <br /> Permittivity ASTM D 4491 <br /> Grab strength ASTM D 4632 <br /> Tear strength ASTM D 4533 <br /> Puncture strength ASTM D 4833 <br /> Geocomposite Component Peel strength/Ply Adhesion ASTM F 904 or <br /> ASTM D 413 <br /> Hydraulic Transmissivity ASTM D4716 <br /> Wide Width Tensile ASTM D4599 <br /> 2.4 PACKING AND LABELING <br /> A. Geocomposites shall be supplied in rolls wrapped in relatively impermeable and <br /> opaque protective covers. <br /> B. Geocomposite rolls shall be indelibly labeled with the following information. <br /> 1. Manufacturer's name; <br /> 2. Product identification; <br /> 3. Lot number; <br /> 4. Roll number; and <br /> 5. Roll dimensions. <br /> C. Geocomposite rolls which cannot be identified because of missing or damaged labels <br /> will be removed from the job site and replaced with properly labeled rolls at no <br /> additional expense to the OWNER. <br /> 2.5 SEWING THREAD <br /> A. Nylon, polypropylene, polyester, or Kevlar thread. <br /> B. Durability: Equal to or greater than durability of geotextile sewn. <br /> FORWARD LANDFILL 02774 <br /> GEOCOMPOSITE <br /> 5 DRAINAGE NET <br />