Laserfiche WebLink
D. Field Quality Control Documents <br /> 1. Submit quality control documentation prepared during installation. Submit <br /> no later than I week following completion of work. <br /> 2. Submit daily prior to the start of installation,subgrade acceptance certificate <br /> signed by the installation supervisor for each area to be covered by the <br /> geomembrane. Allow QA/QC CONSULTANT time to inspect certified area. <br /> E. Equipment: Submit the following 2 weeks prior to installation <br /> 1. Equipment list stating quantity, types, model numbers, calibration <br /> certificates, and maintenance requirements. <br /> F. Submit upon completion of the installation <br /> 1. Certificate stating the liner has been installed in accordance with the plans <br /> and specifications. <br /> 2. The warranty obtained from the manufacturer/fabricator and the installation <br /> warranty. <br /> 3. As-built drawings showing locations of panels, seams,repairs,patches, and <br /> destructive samples, including measurements. <br /> 4. Copies of seam test results. <br /> G. Submit a continuous length of each type of geomembrane measuring 50 feet by the <br /> roll width taken from certified and approved geomembrane rolls delivered to the <br /> Project site. The geomembrane samples submitted shall be labeled with the product <br /> identification, lot number, and roll number. <br /> 1.5 QUALIFICATIONS <br /> A. Master Welder Qualifications: Must have completed a minimum of 5,000,000 square <br /> feet of polyethylene geomembrane seaming work using the type of seaming apparatus <br /> proposed for use on this project. <br /> B. Other Seamers Qualifications: All seamers must have seamed a minimum of <br /> 1,000,000 square feet of HDPE geomembrane. <br /> 1.6 QUALITY ASSURANCE <br /> A. The OWNER will engage and pay for the services of a QA/QC CONSULTANT for <br /> monitoring the quality and installation of geomembrane material being installed <br /> unless otherwise specified. <br /> 1.7 DELIVERY, STORAGE, AND HANDLING <br /> A. General: Conform to the manufacturer's requirements. <br /> FORWARD LANDFILL 02778 <br /> HIGH DENSITY POLYETHYLENE <br /> 5 (HDPE)GEOMEMBRANE <br />