Laserfiche WebLink
B. Installation: Provide an installation warranty for geomembrane material in <br /> compliance with the conditions of the Contract. Provide a minimum of 2 year non- <br /> pro rata warranty for the installation against defects. <br /> PART 2 PRODUCTS <br /> 2.1 GEOMEMBRANE LABELING <br /> A. Provide the following information of geomembrane roll labels. <br /> 1. Length, width, and weight. <br /> 2. Name of manufacturer and fabricator. <br /> 3. Directions for unrolling. <br /> 4. Product identification; lot number, batch number, and roll number. <br /> 2.2 GEOMEMBRANE RESIN <br /> A. High Density Polyethylene (HDPE), new, first quality, compounded, and <br /> manufactured specifically for producing HDPE geomembrane. <br /> B. Do not mix resin types during manufacturing. <br /> C. Meeting the following requirements unless otherwise approved: <br /> Specific Gravity' ASTM D792,Method A,or ASTM D1505 =0.932 g/cm3 <br /> Measure on pure resin without additives. <br /> 2.3 TEXTURED GEOMEMBRANE <br /> A. Manufacturing and Properties. <br /> 1. High Density Polyethylene geomembrane with textured surfaces on both <br /> sides(double side)or a smooth surface on one side and a textured surface on <br /> the other side (single side). Grid or"waffle" style texturing is not allowed. <br /> 2. Do not exceed a combined maximum total of 1 percent by weight of additives <br /> other than carbon black or pigment. Identify percentage of processing aids, <br /> antioxidants, and other additives other than carbon black. <br /> 3. Do not exceed 3.5 percent by weight of finished geomembrane for total <br /> combined processing aids, antioxidants, carbon black, and other additives. <br /> 4. Use materials produced in the United States or Canada. <br /> 5. Provide finished product free from blemishes, holes, pin holes, bubbles, <br /> blisters, excessive gels, undispersed resins, and/or carbon black, <br /> contamination by foreign matter and nicks or cuts on edges. <br /> l FORWARD LANDFILL 02778 <br /> HIGH DENSITY POLYETHYLENE <br /> 7 (HDPE)GEOMEMBRANE <br />