ARCHIVED REPORTS_2003_5 - Laserfiche WebLink

Home Browse Search

• Verify that each roll is marked or tagged with the following information:manufacturer's name; project identification;, lot number; roll number; roll dimensions. Log this information on the geosynthetic receipt form. • Verify that the geosynthetic receipt form is completed. • Verify that materials are stored in a location that will protect the rolls from ultraviolet light exposure,precipitation,mud,dirt,dust,puncture,cutting,or any other damaging or deleterious conditions. Any damaged rolls may be rejected. Verify that rejected material is removed from the site or stored at a location separate from accepted rolls. Geotextile rolls that do not have proper manufacturer's documentation must also be stored at a separate location,until all documentation has been received and approved. 4.3.2 Geotextile Installation Surface Preparation. Before geotextile installation, the QA/QC Inspector will: • Verify that all lines and grades have been verified by the Contractor. • Verify that all seaming and required testing of the HDPE geomembrane underlying the cushion geotextile has been completed. • Verify that the granular drainage material underlying the filter geotextile has been placed to the required thickness. Geotextile Placement and Seaming. During geotextile placement and seaming operations, the QA/QC Inspector will: • Observe the geotextile as it is deployed and record all defects and defect corrective actions(panel rejected,patch installed,etc.). Verify that corrective actions are performed in accordance with the specifications. • Verify that equipment used does not damage the geotextile by handling, equipment transit, leakage of hydrocarbons, or other means. • Verify that crews working on the geotextile do not smoke,wear shoes that could damage the geotextile, or engage in activities that could damage the geotextile. Page 35