ARCHIVED REPORTS_2003_5 - Laserfiche WebLink

Home Browse Search

Any damaged rolls may be rejected. Verify that rejected material is removed from the site or are stored at a location separate from accepted rolls. Geocomposite rolls that do not have proper manufacturer's documentation must also be stored at a separate location,until all docu mentation has been received and approved. 4.4.2 Geocomposite Drainage Net Installation Surface Preparation. Before geocomposite installation, the QA/QC Inspector will: • Verify that all lines and grades have been verified by the Earthwork Contractor. • Verify that the underlying geomembrane has been prepared in accordance with the specifications, and that all associated documentation has been completed. • Verify that soil or geomembrane surfaces do not contain protrusions that could damage the geocomposite. • Verify that there are no excessively soft areas that could damage the geocomposite. • All construction stakes have been removed. • Verify that all aspects of surface preparation have been performed according to the specifications. Geocomposite Placement and Seaming. During geocomposite placement the QA/QC Inspector will: • Observe the geocomposite as it is deployed and record all defects and defect corrective actions(panel rejected,patch installed,etc.). Verify that corrective actions are performed in accordance with the specifications. • Verify that equipment used does no damaged the geocomposite by handling,equipment transit, leakage of hydrocarbons, or other means. • Verify that crews working on the geocomposite do not smoke, wear shoes that could damage the geocomposite, or engage in activities that could damage the geocomposite. • Verify that the geonet side of the geocomposite is placed against the smooth side of the geomembrane. • Verify that the geocomposite is securely anchored to prevent movement by the wind. Page 37