Laserfiche WebLink
The tip of each prong has been sharpened to -make it <br />easier to push the probe in - be careful idth the sharp tips! <br />The probe maybe difficult to insert into extremely <br />9 <br />ECH2O Probe User's Manual <br />3. Installing the Probes <br />then use the Installation kit with extension rods to <br />install the probe. <br />2. Use a thin implement like a trenching shovel, garden- <br />ing spade, or flat bar to make a pilot hole in the soil. <br />Then insert the probe into the hole, making sure the <br />entire length of the probe is covered. Finally, insert the <br />shovel again into the soil a few inches away from the <br />probe, and gently force soil toward the probe to pro- <br />vide good contact between the probe and the soil. For <br />deeper installation, excavate down to the level you <br />to install described. <br />wish measure, then the probe as <br />For the EG5: <br />1. Insert the probes into the soil, making sure that the <br />prongs are buried completely up to the black over - <br />molding, as shown below <br />f <br />i• �f• <br />k6 <br />i <br />The tip of each prong has been sharpened to -make it <br />easier to push the probe in - be careful idth the sharp tips! <br />The probe maybe difficult to insert into extremely <br />9 <br />